Datasheet:  AEMC-L481 |
 |
| AEMC L481 DC Voltage Logger Simple Logger II Description: |
AEMC L481 DC Voltage Logger Simple Logger II is a
bipolar 850VDC data logger. The choice of
data storage modes and storage rates
allows the operator to effortlessly configure
the logger to optimize memory usage to
the application at hand.
Extended Recording Mode (XRM) and delayed start
time are just two of the many application
friendly features in this logger. Internal
memory allows storing over 240,000
measurements, more than enough for
most data collection needs.
User programmable scale and engineering units
are available. Battery operation and
compact size allows for installation in tight
locations without the need for external
power. A series of front panel LEDs
provides a quick status of the logger’s
state and memory usage.
The Simple Logger II Model L481 records
DC voltage at user selectable rates from 8
every second to 1 every day. Voltages can
be measured up to +850VDC with 0.1V
resolution.
|
| AEMC L481 DC Voltage Logger Simple Logger II Applications: |
| |
Railroad - third rail - monitoring
|
| |
Wind generation monitoring
|
| |
Electric cars
|
| |
Find intermittent problems
|
| |
Long term supply monitoring
|
| AEMC L481 DC Voltage Logger Simple Logger II Characteristics: |
| |
Bipolar DC voltage measurement up to 850VDC
|
| |
Programmable storage rates from 8 per second to 1 per day
|
| |
Stores up to 240,000 measurements in non-volatile memory
|
| |
3 user selectable storage modes
|
| |
Alarm level programming quickly lets you see out of tolerance conditions
|
| |
Powered by standard Alkaline batteries
|
| |
Lightweight, compact, fits anywhere
|
| |
5 LED indicators quickly and clearly display logger status
|
| |
Includes DataView software for data storage, real-time waveform display, analysis and report generation
|
| |
USB cable and batteries included
|
| |
EN 61010-1; 300V CAT IV; 600V CAT III
|
| AEMC L481 DC Voltage Logger Simple Logger II Specifications: |
| Channels |
One
|
| Input Connection |
Two recessed 4mm safety banana jacks
|
| Measurement Range |
±850V DC
|
| Resolution |
0.1V
|
| Accuracy (50/60Hz) |
0 to 5V: Unspecified. 5 to 50V: ±(0.5% of Reading +1V). 50 to 850V: ±(0.5% of Reading +0.5V)
|
| Sample Rate |
8 samples/storage interval
|
| Storage Rate |
Programmable from 125ms to 1 day
|
| Storage Modes |
Start/Stop, FIFO, and Extended Recording Mode (XRM)
|
| Recording Length |
15 minutes to 8 weeks, programmable using DataView
|
| Memory |
240,000 measurements (512KB) - Recorded data is stored in non-volatile memory and will be retained even if the battery is low or removed
|
| Communication |
USB 2.0 Optically Isolated
|
| Power Source |
2 x 1.5V AA-cell Alkaline Batteries (included)
|
| Battery Life |
100 hours to > 45 days (dependent on sample rate and recording length)
|
| Dimensions |
4.94 x 2.75 x 1.28" (125 x 70 x 32mm)
|
| Weight (with battery) |
6.4 Oz (181 grams)
|
| Case |
UL94-V0
|
| Vibration |
IEC 68-2-6 (1.5mm, 10 to 55Hz)
|
| Shock |
IEC 68-2-27 (30G)
|
| Drop |
IEC 68-2-32 (1m)
|
| AEMC L481 DC Voltage Logger Simple Logger II Benefits: |
| |
Measures +/-850 Volts DC
|
| |
0.1 Volt resolution
|
| |
Programmable units and scale
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
