Datasheet:  AEMC-ML912 |
 |
| AEMC ML912 AC Current Logger Description: |
AEMC ML912 AC Current Logger is a two channel AC current recording device powered by two alkaline batteries. This AC current logger incorporates two user selectable measurement ranges of 0 to 100 Amps and 0 to 1000 Amps.
|
| AEMC ML912 AC Current Logger Applications: |
| |
Split phase load monitoring
|
| |
Neutral and ground current monitoring
|
| |
Intermittent problem detection
|
| |
Harmonic current monitoring using DataView software
|
| |
Machine load monitoring
|
| AEMC ML912 AC Current Logger Characteristics: |
| |
Two integral MiniFlex flexible current probes measure from 0.5A to 1000A
|
| |
64 samples per cycle
|
| |
Programmable storage rates from 8 every second to 1 every day
|
| |
3 user selectable storage modes
|
| |
Stores up to 240,000 measurements in non-volatile memory
|
| |
Powered by standard Alkaline batteries
|
| |
Lightweight, compact, fits anywhere
|
| |
5 LED indicators quickly and clearly display logger status
|
| |
Includes DataView software for data storage, real-time waveform display, analysis and report generation
|
| |
Isolated USB communication
|
| |
600V CAT III; 300V CAT IV
|
| Includes: |
USB cable, DataView CD-ROM, 2x1.5V AA-cell alkaline batteries, user manual and warranty card.
|
| AEMC ML912 AC Current Logger Specifications: |
| ELECTRICAL: |
|
| Channels |
Two
|
| Input |
Captive MiniFlex AC Current Flexible Sensors
|
| Range |
0.5 to 100AAC
5 to 1000AAC
|
| Accuracy (50/60Hz) |
0 to 1A unspecified
1 to 100A: ±(1% of Reading + 0.5A)
0 to 5A unspecified
5 to 1000A: ±(1% of Reading + 1A)
|
| Resolution |
0.1A
|
| Sample Rate |
64 samples/cycle
|
| Storage Rate |
Programmable from 125ms to 1 day
|
| Storage Technique |
Start/Stop, FIFO and Extended Recording Mode (XRM)
|
| Recording Length |
15 minutes to 8 weeks, programmable using DataView
|
| Memory |
240,000 measurements (512kB).
Recorded data is stored in non-volatile memory and retained even if battery is low or removed.
|
| Communication |
USB 2.0 optically isolated
|
| Power Source |
2x1.5V AA-cell alkaline batteries
|
| Battery Life |
100 hrs to >45 days (dependent on storage rate/recording length)
|
| ENVIRONMENTAL: |
|
| Operating Temp. |
14° to 122°F (-10° to 50°C)
|
| Storage Temp. |
-4° to 140°F (-20° to 60°C)
|
| Relative Humidity |
Up to 85% at 95°F (35°C), Non-condensing
|
| Altitude |
2000m
|
| SAFETY & ELECTRO-MAGNETIC COMPATIBILITY: |
|
| Safety Rating |
EN61010-1; 600V CAT III; 300V CAT IV; Pollution Degree 2
|
| Protection Degree |
IP40
|
| Electro-Magnetic Compatibility |
EN 61326-1; 07/1997 (+A1 10/1998, +A2 09/2001, +A3 05/2004)
|
| MECHANICAL: |
|
| Sensor/Cable Length |
Sensor: 6" (152mm) / Cable: 6 ft (2m)
|
| Case |
UL94-V0
|
| Vibration |
IEC 68-2-6 (1.5mm, 10 to 55Hz)
|
| Shock |
IEC 68-2-27 (30G)
|
| Drop |
IEC 68-2-32 (1m)
|
| Dimensions |
4.95 x 2.75 x 1.28" (136 x 70 x 32mm) w/o Sensor
|
| Weight |
8.67 oz (245g) with battery
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
