Datasheet:  ACD-16-TRMS-PRO |
 |
| Amprobe ACD-16 TRMS Pro Data-Logging Clamp on Multimeter Description: |
Amprobe ACD-16 TRMS Pro 1000A Data-Logging Clamp on Multimeter features are: TRMS and Backlight Screen, Data-logging 5400 points, Optional PC interface capability (RS-232 KIT2. For most applications, the TRMS version of the meter is recommended in order to avoid large measuring errors. If uncertain, always choose TRMS sensing clamp to assure measuring accuracy for all your applications.
There are plenty of look-alike clamp multimeters on the market, but professionals choose genuine Amprobe Instruments. It’s really all about choices.
Amprobe Instruments offers you a full line of Clamp Multimeters (Digital Clamp Meters) for Volts-Amp Resistance, Multimeter, Recording, Power and Power Quality applications. So go with the choice of professionals.
Amprobe Instruments famous Red, Rubber, Ribs make it easy to "grab the Amprobe" you need to get the job done right. For most applications, the TRMS version of the meter is recommended in order to avoid large measuring errors. If uncertain, always choose TRMS sensing clamp to assure measuring accuracy for all your applications.
The Average Sensing clamps are ONLY accurate for pure, undistorted sine wave signals, and may generate errors over 30% for distorted sine waves.
TRMS technology assures accurate measurements, regardless of a distortion of the signal. The distortion of the voltage or current is caused in most cases by "Non-linear" loads for example: Electronics (radios, VCRs, computers, TV sets, etc…), Light dimmers, Variable Frequency Drives (VFDs), Adjustable Speed Drives (ASDs), Uninterruptible Power Supplies (UPSs), Fluorescent and energy saving lights and many more.
The distorted wave is transmitted across the power lines and it affects all electrical equipment connected to the same system.
|
| Amprobe ACD-16 TRMS Pro Data-Logging Clamp on Multimeter Characteristics: |
| |
TRMS and Backlight Screen
|
| |
Measurements: AC/DC Voltage up to 600V, AC Current up to 1000A, Resistance, Frequency and Temperature
|
| |
Data-logging 5400 points
|
| |
Optional PC interface capability (RS-232 KIT2)
|
| |
Audible continuity
|
| |
Auto power off
|
| |
Automatic polarity
|
| |
Low battery indication
|
| |
Data hold
|
| |
Large, easy to read LCD display
|
| |
Accommodates conductors up to 1.77 inches (45mm) in diameter
|
| |
Carrying case, thermocouple, test leads, batteries (installed) and user manual included
|
| |
Voltage overload protection for all functions up to 600V AC/DC
|
| Amprobe ACD-16 TRMS Pro Data-Logging Clamp on Multimeter Features: |
| Safety: |
CAT III 600V
|
| Instruction Manual: |
Yes
|
| |
Need the perfect tool to troubleshoot a system? The ACD-16’s provide a full range of measurements, enhanced with data logging capabilities, to catch what the eye can’t see. Double the efficiency, with an optional PC interface kit.
|
| Temperature Basic Accuracy: |
+/-(2.0% Rdg + 6F) +/-(2.0 % Rdg + 3C)
|
| Replacement Parts: |
Supplied with product
|
| |
MTL-90B - Set of Test Leads with Alligator Clips
|
| Amprobe ACD-16 TRMS Pro Data-Logging Clamp on Multimeter Specifications: |
| TRMS: |
Yes
|
| AC Current: |
40.0 / 400.0 / 1000 A
|
| AC Current Basic Accuracy: |
+/-(1.0% Rdg + 5 LSD) @ 50 and 60Hz
|
| DC Voltage: |
600.0V
|
| DC Voltage Basic Accuracy: |
+/-(0.5% Rdg + 5 LSD)
|
| AC Voltage: |
600.0V
|
| AC Voltage Basic Accuracy: |
+/-(1.0% Rdg + 5 LSD) @ 50 / 60 Hz
|
| Resistance: |
999.9 Ohms
|
| Resistance Basic Accuracy: |
+/-(1.0% Rdg + 6 LSD)
|
| Frequency: |
5.00Hz to 500.0Hz
|
| Frequency Basic Accuracy: |
+/-(0.5% Rdg +4 LSD)
|
| Temperature: |
58 F to 572 F (-50 C to 300 Degrees C)
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
