Datasheet: RS3PRO |
 |
| Amprobe RS-3 PRO 600A CAT IV Analog Clamp Meter Description: |
 Amprobe RS-3 PRO 600A CAT IV Analog Clamp Meter works well in extreme temperatures from 5 F to 122 F, while digital clamp LCD screens tend to freeze this analog clamp measures up to the test. This analog clamp does not require batteries for measuring Amps and Volts.
 |
| Amprobe RS-3 PRO 600A CAT IV Analog Clamp Meter Characteristics: |
| |
 Measures AC Current up to 300A
 |
| |
 Measures Voltage up to 600 VAC
 |
| |
 Resistance and Continuity
 |
| |
 Pointer Lock - Data hold
 |
| |
 Easy to use Rotary Scale
 |
| |
 Measures Volts and Amps, no batteries required
 |
| |
 Works in temperatures from 5°F to 122°F
 |
| |
 Operates on 50 and 60 Hz frequency
 |
| |
 CAT IV, 600 V Safety Rated
 |
| Includes: |
 Test leads, battery (installed, for resistance measurement only), Users Manual, Carrying Case
 |
| Amprobe RS-3 PRO 600A CAT IV Analog Clamp Meter Specifications: |
| Display |
 Analog scales with clamping needle
 |
| Jaw opening/Conductor diameter: |
 41mm (1.64") max
 |
| Power Supply Volt/amp |
 Powered by circuit under test 1.5 V AAA battery (ANSI/NEDA-24A, IEC LR03)
 |
| Environmental: |
 Indoor operation; below 2000m (6,562ft)
 |
| AC Voltage (50/60 Hz) |
 150 / 300 / 600 Vrms
 |
| Accuracy |
 ± 3 % of Full Scale
 |
| Input Impedance |
 1.5 MOhm
 |
| AC Amp (50/60 Hz) Ranges |
 6 / 15 / 40 / 100 /600 Arms
 |
| Ohms Range: |
 1000 ohms; 25 Ohms mid-scale
 |
| Accuracy |
 ± 3 degrees of Arc
 |
| Safety |
 CAT IV, 600 V Safety Rated
 |
| Dimensions |
 243 x 102 x 41 mm (10.3 x 4.0 x 1.6 in.)
 |
| Weight |
 0.455 kg (1.0 lb.)
 |

Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |