| Datasheet: |
 |
| BI Communications LanCaster Pro ST Network Cable Tester Troubleshooting Description: |
BI Communications Lancaster Pro ST Network Cable Tester Troubleshooting, is a hand held structured cabling tester and trouble shooter, designed for use on screened and unscreened cables.
This Network Cable Tester is fitted with
RJ45 connectors and wired to either TIA568 A/B, U.S.O.C or I.S.D.N standards. It will store up to 1,000 test results for downloading to P.C to
produce an installation test report, showing time and date of test, wiring standard, installed cable length, pass/fail result and location of site tested.
All test results for display textually and graphically along with cable length,
wiring standard, V.P, an outlet address and smart remote ID number, audible pass/fail tone is emitted by the main unit with a red/green pass/fail LED on the remote unit.
When plugged into an active port it will emit an audible tone if telephone voltages are present on any of the pins and will identify 10 base T. Token
Ring and 100 Mbit connections and inhibit testing, in the presence of live
circuits an inbuilt tone generator can be selected for cable tracing. Made in England.
|
| BI Communications LanCaster Pro ST Network Cable Tester Troubleshooting Characteristics: |
| |
Certifies cable continuity to TIA568A/B
|
| |
Records 1000 results/view or download to PC
|
| |
Large 128x64 pixel :CD with Back light
|
| |
Multi-lingual customisable certification software
|
| |
Displays Time and date for recording test data
|
| |
Measures length of all 4 pairs
|
| |
150m (500ft) measuring range
|
| |
Voltage warning and test inhibit
|
| |
Indicates all common wiring faults including split pairs
|
| |
Measuring and identifies length of fault
|
| |
Instant graphical display gives unambiguous fault indication
|
| |
Rugged palm-top design weighs less than 390g
|
| |
Complete with 1 active remote unit and test leads
|
| |
Up to 16 unique intelligent remote units/office identifiers
|
| |
Up to 7 hours continuous battery life
|
| |
Supplied with cary case
|
| |
Scratch resistant display
|
| |
Works with the following Cable Types: UTP, STP, FTP & SSTP
|
| BI Communications LanCaster Pro ST Network Cable Tester Troubleshooting Specifications: |
| Range |
500 ft (150m)
|
| Accuracy |
+-5%
|
| Faults Indicated |
Short Circuit Pair
Open Circuit Wire
Short Between Pairs
Split / Cross Pairs
Pair Reversals
Shield Continuity
|
| Fault Location |
Near End, Remote End, or distance
if midway
|
| Wiring Schemes |
TIA 568A/B, USOC & ISDN
|
| Service Indication |
Telephone, 10BaseT, 100Mbit+,
Token Ring
|
| Voltage Warning |
Warns of TNV (Telecom Network
Voltage) presence
|
| Test Inhibit |
Inhibits Testing in the presence of
live voltages
|
| Tone Generator |
Tone generator (oscillating) 810Hz - 1110Hz
|
| Battery indicator |
Gas Gauge, Bargraph
|
| Main Unit Display |
128 x 64 pixel Graphical LCD
|
| Fault Display |
All fault and setting info displayed
textually and graphically
|
| Display Backlight |
Electroluminescent
|
| Remote Display |
Green/Red LED
|
| Languages |
English (USA and UK), German,
French, Spanish, Portuguese, Italian
|
| Power Supply |
4 x 1.5VAA alkaline batteries
|
| Auto Power Off |
Selectable, disabled 1, 2, 3 minutes
or disabled
9
|
| Battery Life |
Standby mode >4000hrs
Continuous testing >7.5hrs
|
| Storage Temperature |
(-4 to 158 F) -20 to 70 C
5 to 95% RH non-condensing
|
| Operating Temperature |
32 to 112 F 0 to 40 C, 5 to 95% RH non-condensing
|
| Main Unit Weight |
12 oz 350g
|
| Main Unit Dimensions |
6.5 x 3.5 x 1.5, 165 x 90 x 37mm
|
| Remote Weight |
(1.5 oz) 40g
|
| Remote Dimensions |
2.5 x 2.0 x 1.0, 65 x 52 x 25mm
|
| Standards Used |
Safety: IEC61010-1
EMC: EN61326-1
CE: Compliant with current EU directives
ESD: EN61000-4-2
EM: EN61000-4-3
Burst: EN61000-4-4
Conducted RF: EN61000-4-6
10
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
