| Datasheet: |
 |
| Fluke 1587 T Insulation Multimeter Description: |
Fluke 1587 Insulation Multimeter (Mfg Part No. 2517605) combines a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit. This insulation multimeter provides maximum versatility for both troubleshooting and preventative maintenance.
|
| Fluke 1587 T Insulation Multimeter Characteristics: |
| |
Auto discharge of capacitive voltage
|
| |
AC/DC Voltage
|
| |
DC millivolts
|
| |
AC/DC milliamps
|
| |
Continuity
|
| |
Remote probe, test leads, alligator clips
|
| |
Rugged, utility hard case
|
| |
Auto power off to save battery power
|
| |
True-rms
|
| |
Large display with backlight
|
| |
Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
|
| |
CAT III 100V, CAT IV 600V measurement category
|
| |
Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work
|
| |
Three-year warranty
|
| |
Insulation test smoothing reading
|
| |
Frequency
|
| |
Capacitance
|
| |
Diode test
|
| |
Temperature
|
| |
Min/Max
|
| |
K-type thermocouple
|
| Fluke 1587 T Insulation Multimeter Specifications: |
| Operating temperature |
–20 °C to +55 °C
|
| Storage temperature |
-40°C to +60°C
|
| Humidity (Without Condensation) |
0% - 95% (10 °C – 30 °C)
0% - 75% (30 °C – 40 °C)
0% - 40% (40 °C – 55 °C)
|
| Operating Altitude |
Operating Altitude 2000 m
|
| Overvoltage category |
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
|
| Agency Approvals |
2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V
|
| Size |
203 x 100 x 50 mm (with holster)
|
| Weight |
624 g
|
| Battery life Alkaline |
Meter use: 1000 hours
Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
|
| IP Rating |
IP40
|
| Voltage DC: |
Maximum Voltage: 1000 V
|
| |
Accuracy: ±(0.09%+2)
|
| |
Maximum Resolution: 0.001V
|
| Voltage AC: |
Maximum Voltage: 1000 V
|
| |
Accuracy: ±(2%+3)
|
| |
AC Bandwidth: 5kHz*
*with low pass filter; 3db @ 800 Hz
|
| |
Maximum Resolution: 0.1 mV
|
| Current DC: |
Maximum Amps: 400mA
|
| |
Amps Accuracy: ±(0.2%+2)
|
| |
Maximum Resolution: 0.01 mA
|
| Current AC: |
Maximum Amps: 400mA
|
| |
Amps Accuracy: ±(1.5%+2)*
*1kHz bandwidth
|
| |
Maximum Resolution 0.01 mA
|
| Resistance: |
Maximum Resistance: 50 MΩ
|
| |
Accuracy ±(0.9%+2)
|
| |
Maximum Resolution: 0.1Ω
|
| Capacitance: |
Maximum Capacitance: 9,999 µF
|
| |
Accuracy: ±(1.2%+2)
|
| |
Maximum Resolution: 1 nF
|
| Frequency: |
Maximum Frequency: 100 kHz
|
| |
Accuracy: ±(0.1%+1)
|
| |
Maximum Resolution: 0.01 Hz
|
| Temperature Measurement: |
40.0 °C to 537 °C
-40.0 °F to 998 °F
excluding probe
|
| Diode Test: |
Range: 6 V
|
| |
Resolution: 1 mV
|
| |
Accuracy: ±(2% + 1)
|
| Insulation Test: |
|
| Minimum Test Current @ 1kΩ/V: |
1mA
|
| Maximum Resistance per Test Voltage: |
1000V: 2 GΩ
|
| Maximum Resolution per Test Voltage: |
50V: 0.01 MΩ
100V: 0.01 MΩ
250V: 0.1 MΩ
500V: 0.1 MΩ
1000V: 0.1 MΩ
|
| Accuracy per Test Voltage: |
50V: ±(3 % + 5)
100V: ±(3 % + 5)
250V: ±(1.5 % + 5)
500V: ±(1.5 % + 5)
1000V: ±(1.5 % + 5) to 600 MΩ, ±(10 % + 3) above 600 MΩ
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
