Datasheet:  Fluke-1750 |
 |
| Fluke 1750 Three Phase Power Recorder 2157153 Description: |
Fluke 1750 Three Phase Power Recorder (Mfg part No. 2157153) record three-phase power quality and monitor for power quality disturbances. This three phase recorder automatically record every power quality parameter and event, on every cycle.
|
| Fluke 1750 Three Phase Power Recorder 2157153 Applications: |
| |
Long-term analysis
|
| |
Power quality surveys
|
| |
Quality of service compliance
|
| |
Semi-permanent monitoring
|
| Fluke 1750 Three Phase Power Recorder 2157153 Characteristics: |
| Virtual Product Demo |
Clamp Meter Demo
|
| |
Premium accuracy and measurement techniques: Guaranteed for all power quality parameters, with IEC 61000-4-30 Class A measurement systems
|
| |
Quick and reliable configuration: PDA wireless “front panel interface” provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations
|
| |
Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software
|
| |
Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time
|
| |
Intuitive PC software: Easily analyze data and generate reports
|
| |
Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections
|
| |
No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct
|
| |
Measure every parameter: Voltage and current on three phases, neutral, and ground
|
| |
5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
|
| |
Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection
|
| Fluke 1750 Three Phase Power Recorder 2157153 Specifications: |
| Power quality measurement standards: |
Conformance: IEC 61999-1-4 Class 1, IEC 61000-4-30 Class A or B depending on measurement function, IEEE519, IEEE1159, IEEE1459
|
| |
Clock/calendar: Leap years, 2 4-hour clock
|
| |
Real-time clock accuracy: Not more than ± 1 s/day
|
| |
Internal memory capacity for data: At least 1 GB
|
| |
Maximum recording period: At least 31 days
|
| |
Measurement time control: Automatic
|
| |
Maximum number of events: Limited only by the size of the internal memory
|
| |
Power requirements: 100 to 2 40 V rms ± 10 %, 47-63 Hz, 40 W
|
| |
Operating time during interruptions (internal UPS operation): 5 minutes per interruption, 60 minutes total operating time without recharging
|
| |
Dimensions 215 mm x 310 mm x 35 mm (8.5 in x 12.2 in x 3.5 in)
|
| |
Mass (weight) 6.3 kg (14 lb)
|
| Input: |
Measurement types: One Phase Plus Neutral, One Phase IT No Neutral, One Phase Split Phase, Three Phase Wye, Three Phase Delta, Three Phase IT, Three Phase High Leg, Three Phase Open Leg, 2 Element Delta, 21/2 Element Wye
|
| |
Input channels: Voltage: 4 channels, ac/dc
Current: 5 channels
|
| |
Voltage channels: Input resistance: 2 MΩ
Input capacitance: < 2 0 pF
|
| |
Current input characteristics: 2 V rms = full scale, 1 MΩ Input Impedance for ferro CTs, low impedance for Flexi-CTs
|
| |
Measuring method: Simultaneous digital sampling of voltage and current. Digital PLL synchronized sampling, internal frequency reference used during voltage drops.
|
| Synchronization and sampling: |
PLL-synchronization source: The PLL synchronizes to the A-N voltage for wye power types, and to the A-B voltage for delta power types. All listed power types can be characterized as either wye or delta.
|
| |
PLL lock range: 42.5 to 69 Hz
|
| |
Sampling frequency: Voltage and current: 2 56 samples/cycle Inter-harmonics per IEC 61000-4-7: 2 560 points/10 cycles (50 Hz), 3072 points/12 cycles (60 Hz) Transient Voltage: 5 MHz
|
| |
A/D resolution: Voltage and current: 2 4 bits
Transient voltage: 14 bits
|
| Voltage and current measurements: |
Voltage measurement range: AC voltage: 1000 V rms ± 10 % over range
DC voltage: ± 1000 V + 10 % over range
|
| |
Voltage crest factor: 3 or less
|
| |
Current measurement range: Depends on current probe used
|
| |
Current crest factor: 4 or less
|
| RMS voltage: |
Measurement type: True rms calculated continuously: every cycle, every 1/2 cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by IEC 61000-4-30.
|
| |
Measurement uncertainty: AC: ± 0.2 % reading ± 0.1 % full scale, above 50 V rms
DC: ± 0.5 % reading ± 0.2 % full scale, above 50 V dc
|
| RMS current: |
Measurement type: True rms calculated continuously: every cycle, every 1/2 cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards
|
| Transient voltage (impulse: |
Measurement type: Waveshape sampling
|
| |
Full scale: 8000 V pk
|
| |
Sample resolution: 200 nS
|
| |
Measurement uncertainty: ± 5 % reading ± 2 0 V (test parameters: 1000 V dc, 1000 V rms, 100 kHz)
|
| Voltage swell (rms swell): |
Measurement type: True rms (one cycle calculation by overlapping each half cycle - voltage between lines is measured for 3P3W lines and phase voltage is measured for 3P4W lines)
|
| |
Displayed data: Amplitude and duration of swell
|
| |
Measurement uncertainty: AC: ± 0.2 % reading ± 0.1 % full scale, above 50 V rms
DC: ± 0.5 % reading ± 0.2 % full scale, above 50 V dc
|
| Voltage dip (rms sag): |
Measurement type: True rms (one cycle calculation by overlapping each half cycle - voltage between lines is measured for 3P3W lines and phase voltage is measured for 3P4W lines)
|
| |
Displayed data: Amplitude and duration of dip or interruption
|
| Voltage dropout (interruption): |
Measurement type: True rms (one cycle calculation by overlapping each half cycle - voltage between lines is measured for 3P3W lines and phase voltage is measured for 3P4W lines)
|
| LAN interface: |
Connector: RJ-45
|
| |
Speed and type: 10/100 Base-T, auto MDIX
|
| |
Communications protocol: TCP/IP over Ethernet
|
| Wireless controller interface: |
Connection: wireless (2.4 GHz radio)
|
| |
Speed: up to 700 kbit/second
|
| |
Communications protocol: Bluetooth SPP
|
| Power, battery life |
Measurement type: True rms calculated continuously: every cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards
|
| Frequency: |
Measurement range: 42.5 to 69 Hz
|
| |
Measurement source: the A-N voltage for wye power types, and to the A-B voltage for delta power types. All listed power types can be characterized as either wye or delta.
|
| |
Measurement accuracy: ± 10 mHz (10 to 110 % of range, with sine wave)
|
| Power Factor: |
Measurement range: 0.000 to 1.000
|
| |
Measurement accuracy: ± 1 digit from the calculation of each measured value (±3 digits for total)
|
| Displacement power factor: |
Measurement method: Calculated from the phase difference between voltage fundamental and current fundamental
|
| |
Measurement range: - 1.000 (leading) to + 1.000 (lagging)
|
| |
Measurement accuracy: ± 0.5 % reading ± 2 % full scale ± 1 digit
|
| Voltage unbalance and phase sequence: |
Measurement method: Positive sequence voltage divided by negative sequence voltage, per IEC 61000-4-30
|
| Harmonic voltage and current: |
Analysis window: rectangular
|
| |
Analysis order: 1st to 50th order
|
| |
Measurement accuracy: Voltage / Current: 1st to 2 0th orders: ± 0.5 % reading ± 0.2 % full scale, 2 1st to 50th orders: ± 1 % reading ± 0.3 % full scale (current sensor accuracy must be included for current and power
|
| |
Measurement method: IEC 61000-4-7
|
| Inter-harmonic voltage and current (intermediate h |
Analysis window: rectangular
|
| |
Analysis orders: 1.5 to 49.5th order
|
| Environmental: |
Operating environment: Indoors or in covered area outdoors, up to 2000 m altitude
|
| |
Storage temperature and humidity: -20 °C to 50 °C, 80 % RH max, non-condensing
|
| |
Operating temperature and humidity: 0 °C to 40 °C, 80 % RH max, non-condensing
|
| Maximum rated working voltage: |
Voltage terminals: 1100 V rms
|
| |
Voltage durability: 5550 V rms ac for 1 minute, between voltage input terminals, voltage input terminals and current probes, and voltage input terminals and case (50/60 Hz, 1 mA sense current)
|
| |
Enclosure protection: IP30 (per EN 60529)
|
| Standards: |
EMC: EN 61326-1:1997+A1:1998 Class A
EN 61000-3-2:1995+A1:1998+A2:1998
EN 61000-3-3:1995
|
| |
Safety: EN 61010-1 2 nd Edition; 2 000
Voltage input unit: Contamination Level 2 , Overvoltage Category 1000 V CAT III, 600 V CAT IV (anticipated overvoltage: 8000 V)
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
