Datasheet:  Fluke-27II-28II-DMM |
 |
| Fluke 28 II Industrial Multimeter 3301271 Description: |
Fluke 28 II Industrial Multimeter (mfg. part no. 3301271) defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems.
Fluke 28 II Industrial Multimeter has IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15°C to +55°C (5°F to 131°F, -40°C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop.
|
| Fluke 28 II Industrial Multimeter 3301271 Characteristics: |
| |
IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
|
| |
Designed to withstand 3 meter drop (with holster)
|
| |
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
|
| |
Backlit keypad buttons allow for easy visibility in lowlit areas
|
| |
Large display digits and 2 level bright white backlight for increased visibility
|
| |
Reversible holster for added protection when not in use
|
| |
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
|
| |
Long battery life
|
| |
Relative mode to remove test lead resistance from low ohms measurements
|
| |
Auto and manual ranging for maximum flexibility
|
| |
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
|
| |
Resistance, continuity and diode test
|
| |
Min/Max and average recording to capture variations automatically
|
| |
Peak min-max
|
| |
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
|
| |
Hi resolution 20,000 count display mode
|
| |
True-rms ac voltage and current for accurate measurements on non linear signals
|
| |
MSHA approval (pending)
|
| Warranty: |
Limited lifetime
|
| Fluke 28 II Industrial Multimeter 3301271 Specifications: |
| DC voltage |
Range: 0.1 mV to 1000 V
Accuracy: 0.05 percent +1
|
| AC voltage |
Range: 0.1 mV to 1000 V
Accuracy: 0.7 percent +4
|
| DC current |
Range: 0.1 μA to 10 A
Accuracy: 0.2 percent + 4
|
| AC current |
Range: 0.1 μA to 10 A
Accuracy: 1.0 percent + 2
|
| Resistance Range |
0.1 Ohm to 50 MOhm
|
| Display counts |
6000/19,999
|
| Capacitance |
1 nF to 9999 μF
|
| Frequency |
0.5 Hz to 199.99 kHz
|
| Compliance |
CAT IV 600V, CAT III 1000V
|
| IP rating |
IP 67
|
| Power |
Three AA batteries
|
| Battery life |
800 hours
|
| Data storage |
Peak transient capture: 250 μS (28 II)
|
| Dimensions with holster |
6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in)
|
| Weight with holster |
698.5 g (1.54 lb)
|
| Temperature |
-200 °C to +1090 °C
|
| Data storage Peak transient capture |
250 µS
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
