Datasheet:  Fluke-374-375-Clamp-Meter Fluke-DMM-Vs-Clamp-Meter Fluke-Multimeter-Safety |
 |
| Fluke 375 True-rms AC/DC Clamp Meter with iFlex 3781842 Description: |
Fluke 375 600 A True-rms AC/DC Clamp Meter with iFlex. With true-rms ac voltage and current measurements, the Fluke 375 Clamp Meter can ready up to 600 V and 600 A in both ac and dc modes, and is capable of frequency measurement up to 500 Hz.
Additionally, the 375 is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500 A ac.
Safety Conformance: EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV. Free ground shipping within continental US.
|
| Fluke 375 True-rms AC/DC Clamp Meter with iFlex 3781842 Features: |
| |
IFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
|
| |
CAT IV 600 V, CAT III 1000 V
|
| |
True-rms ac voltage and current for accurate measurements on non-linear signals.
|
| |
500 mV dc measurement range to interface with other accessories.
|
| |
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings.
|
| |
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
|
| |
Ergonomic design fits in your hand and can be used while wearing protective equipment.
|
| |
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement.
|
| Warranty |
Three-year warranty
|
| Safety conformance |
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV
|
| Fluke 375 True-rms AC/DC Clamp Meter with iFlex 3781842 Specifications: |
| Diameter of measurable conductor |
0.13 in or 34 mm max
|
| Operating temperature |
-14 to 122 degrees F (-10 to 50 degrees C)
|
| Storage Temperature |
-40 to 140 degrees F (-40 to 60 degrees C)
|
| Operating Humidity |
< 90 percent at 10 to 30 degrees C, < 75 percent at 30 to 40 degrees C
|
| Operating Altitude |
0 to 3000 m
|
| Size |
246 x 83 x 43 mm, (9.685 x 3.267 x 1.692 in.)
|
| Weight |
388g, (14 oz.)
|
| Temperature Coefficient |
0.01 percent degrees C
|
| Warranty |
Three years for electronics
One year for cable and clamp assembly
|
| Fluke 375 True-rms AC/DC Clamp Meter with iFlex 3781842 Applications: |
| Fluke 375 is used on: |
Industrial equipment, Industrial controls, Electrical systems, Commercial/Industrial HVAC
|
| Who uses Fluke 375: |
Imdustrial maintenance technicians, Control technicians, Control technicians, Electrical and HVAC contractors
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
