Datasheet:  Ideal-33-974 |
 |
| Ideal Industries 33-974 Signaltek Network Cable Performance Tester Description: |
Ideal Industries 33-974 Signaltek Network Cable Performance Tester provides a technically innovative method to test and document the performance of voice, data, and video applications for cabling installers and network technicians.
Ideal Industries 33-974 Signaltek cable performance tester tests the link’s ability to support applications by transmitting Ethernet packets on the link and measuring performance according to the IEEE 802.3ab Gigabit Ethernet standard, the ultimate performance indicator
for any network.
|
| Ideal Industries 33-974 Signaltek Network Cable Performance Tester Applications: |
| |
Cabling installers
|
| |
Network technicians
|
| Ideal Industries 33-974 Signaltek Network Cable Performance Tester Characteristics: |
| Kit Includes: |
1 SIGNALTEK Near-end and remote-end handset; Black Nylon carrying case, 2 12 in. (30.5cm) RJ11 silver satin cables; 2 24 in. (61cm) RJ45-to-F patchcords; 2 12 in. (30.5cm) RJ45 shielded patchcords; 2 12 in. (30.5cm) RJ45-twin alligator clip cords; 8 AA alkaline batteries; USB cable; Quickstart guide and CD-ROM User Manual
|
| |
Gigabit Performance Qualification – Test to
IEEE 802.3 standards
|
| |
Selectable Performance Testing – qualify performance of Data, Voice over IP, and IP Video applications
|
| |
Performs Gigabit Ethernet link establishment test in 10 seconds
|
| |
Data Monitoring to detect intermittent network problems
|
| |
Smart Autotest Function detects the presence of the SIGNALTEK remote, active network device or open ended cable and automatically runs the appropriate test suite
|
| |
Intuitive Graphical User Interface for fast and easy operation
|
| |
Internal and USB Data Storage – store 20,000 tests internally or unlimited on USB drive
|
| |
Prints Easy-to-Read Pass/Fail Qualification Reports
|
| |
Provides comprehensive cable testing for voice, data, and video applications
|
| |
Performs complete wiremap and length tests of: 1, 3, and 4 pair UTP/STP, and series 6/59 coaxial cable to TIA-568 A/B and TIA-570 standards
|
| |
Performs a full IEEE 802.3ab compliant Gigabit Ethernet packet test in about 35 seconds with 97% performance certainty
|
| |
Includes a TDR (Time Domain Reflectometer) for accurate length measurements and to aide in locating cabling faults by providing distance to short/open information
|
| |
Supplied alligator clips allow testing of speaker, alarm, thermostat, home automation devices, and nearly any other type of control wire
|
| |
Offers service detection to verify true 10/100/1000 Mbps Ethernet operations
|
| |
Provides Bit Error Rate test for VoIP, data, and videoover-IP applications
|
| |
User-defined data logging and network monitoring to detect problems that may cause network outages
|
| |
Selectable test modes to qualify cabling support of Data, Voice over IP, and IP Video transmissions
|
| |
IP pinging can be used to verify the communication of many devices including IP cameras, home automation, and A/V control panels
|
| |
Offers network diagnostic tools such as link establishment, port LED blink, and ping
|
| |
Supports static and dynamic (DHCP) IP configuration
|
| |
Allows multiple target IP and web addresses for pinging several network devices and confirming operation of network switches and routers
|
| |
Generates easy pass/fail reports of link performance in accordance with IEEE 802.3ab standards
|
| |
Stores 20,000+ records on internal memory
|
| |
Accepts USB memory drives for unlimited storage
|
| |
Direct printing to supported USB printers
|
| |
No special software required, view reports
with any web browser
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
