Datasheet:  JDSU-IVT600 |
 |
| JDSU IVT600 Tri-Porter Network Qualification and Testing Tool Description: |
JDSU IVT600 Tri-Porter Network Qualification and Testing Tool is the first network installation tester that provides a full range of physical wiring tests for the fast, efficient delivery of IP-based voice, data and video services in the home or small office with one integrated tool.
Tri-Porter replaces up to 6 traditional testing tools.
Testing and verifying IP-based services in your customers’ premises now takes less time and is more convenient and economical than ever before. Coax runs, network systems and voice/telephony
lines are all easily tested and verified for service levels to assure optimal performance.
Test-Um IVT 600 Tri-Porter provides three services, voice, data and video, that customers require today for 21st century living. These three services travel over the premise cabling, which needs to be tested and qualified to assure good quality signals with adequate capacity. Tri-Porter is the answer to this need, with its multi-functional, broad-based capabilities.
Test-Um’s IVT600 Tri-Porter performs Test, Talk and Trace, in one all-encompassing product. This Network Qualification and Testing Tool will make your job of testing and configuring cables easier, faster and more accurate, at a cost that is a fraction of what you would expect to pay.
|
| JDSU IVT600 Tri-Porter Network Qualification and Testing Tool Applications: |
| |
Network Qualification and Testing Tool
|
| JDSU IVT600 Tri-Porter: |
Performs test, talk and trace home and office: voice, data, and video cabling instalations
|
| JDSU IVT600 Tri-Porter Network Qualification and Testing Tool Characteristics: |
| Voice: Telephony Testing |
Testing and verifying proper
operation of each telephone
outlet assures adequate signal
levels for all offered services.
Power-up telephone systems with
the on-board dial tone simulator
(SLIC) to test connected runs.
|
| |
Advanced-function telephone butt set
|
| |
Call analysis and discovery
|
| |
Voltage and current readings
|
| |
Line number discovery with captured digits
|
| |
DTMF decode to watch dialed call numbers for accuracy
|
| |
Call Waiting service testing
|
| |
SLIC simulator to test lines without
outside provider service
|
| |
Speakerphone for hands-free listening
to dial tone and line monitoring
|
| |
DSL safe
|
| |
20-pc remote wiremapping set
|
| Data: Testing Ethernet Networks |
Test newly-installed network cables on
unpowered systems or check active
working networks to detect any physical
layer or configuration problems.
|
| |
Configure the network, test the cables and
guarantee the quality
|
| |
Tests to TIA568 interconnect specifications
and connected length; CAT5, 5E and 6
|
| |
Port discovery—ISDN, POTS, Token Ring,
Ethernet, etc.
|
| |
Negotiates at 100 Mbit with DHCP or
manual addressing
|
| |
Ping for IP address information and configuration
|
| |
Identify equipment on the other end of the
line, showing its speed and type
|
| |
Link speed displayed, 10/100Mbit
|
| |
Hub blink to find connected ends in wiring closets
|
| |
Qualify lines for VoIP service at 100Mbit speeds
|
| |
Cisco Discovery Protocol ready
|
| Video: RF Detection and Testing |
HDTV, video-on-demand,
cable modems, etc., all
demand superb signal quality
to work correctly. Testing
for physical and electronic
variations will guarantee that
everything works as it should.
|
| |
Detects and measures RF service
energy levels DB/Mv
|
| |
Tests for opens and shorts
|
| |
Displays length of each tested run
|
| |
The unique tone signal—
which travels through splitter,
filters and traps to trace lines
while the system is powered-up
and in-use—is detectable by
the Tri-Porter tracer unit
|
| |
Storage temperature: –30 to 80°C (–20 to 176°F)
|
| |
Humidity: 10% to 90%, non-condensing
|
| JDSU IVT600 Tri-Porter Network Qualification and Testing Tool Specifications: |
| Physical Dimensions: Size |
Centimeters: 20 x 8.9 x 5.6; inches: 8.0 x 3.5 x 2.2; grams: 740; ounces: 26
|
| |
Tracer/Remote: centimeters: 15 x 5.8 x 4.3; inches: 9.3 x 2.3 x 1.7; grams: 285; ounces: 10
|
| Environmental: |
Operating temperature: 0 to 50°C (32 to 122°F)
|
| Battery Life: |
Times are for the full capacity of the battery used continuously in one of the following modes:
|
| |
Main Unit (six AA alkaline): Standby (years): 2.5
|
| |
No backlight: Testing (hours): Cable: 50; Network: 13; Phone (hours): 27
|
| |
50% backlight: Testing (hours): Cable: 27; Network: 12; Phone (hours): 22
|
| |
Tracer/Remote: Standby (years): 2.5; Phone (hours): 18; Tracing (hours): 13.5
|
| Network Testing: |
10Mb or 100Mb Ethernet
|
| Cable Types: |
Shielded or unshielded CAT-3, CAT-5, CAT-5E or CAT-6; coax; 2-, 4- and 6-pair telephone cabling
|
| Minimum Cable Length: |
When testing for split pairs: Meters: 1; Feet: 3
|
| |
For single-ended cable test Meters: 1.25; Feet: 4
|
| |
Length Measurement Range: paired cable or CAT-5/6: Meters: 1 to 457; Feet: 3 to 1500
|
| |
Coax cable: Meters: 1 to 300; Feet: 3 to 1100
|
| |
Tri-Porter comes with a handy carrying case, which
holds both the main unit and the remote tester/tracer,
along with the 20-piece wiremapping sets for remote
discovery of telephone, coax, and network cables.
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
