Datasheet:  JDSU-NT700 |
 |
| JDSU NT700 LanScaper Network Tester Description: |
JDSU NT700 LanScaper Network Tester detects active devices up to 100 Mb/s, pings, blinks link indicators on remote devices, tests cabling configuration, displays cable length, and generates tones.
JDSU NT700 LanScaper Network Tester is a jack identifier, cable tester, length measurement device, and ping tester in one unit.
The easy-to-use LanScaper enables quick identification at unknown RJ45 jacks for active Ethernet, POTS, Token Ring, or other devices. It pings network devices to verify connections and IP addresses, automatically accessing DHCP hosts to obtain network information.The LanScaper can quickly identify hubs, NICs, or auto MDI/MDI-X devices and conduct link tests to identify speed and capabilities of network drops.
For cable testing, the LanScaper provides full cabling testing, displaying wire map, ID, and faults, including shorts, opens,miswires, split pairs, and reverses.The fullfeatured LanScaper also measures cable length and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin. Formerly Test-Um model NT700.
|
| JDSU NT700 LanScaper Network Tester Characteristics: |
| |
Combines the functions of a high-end cable tester and length measurement device.
|
| |
Capability to monitor and correct network problems connected with the physical layer and link conditions.
|
| |
Identifies speeds up to 100 Mb/s, duplex mode, and other capabilities of active Ethernet device
|
| JDSU NT700 LanScaper Network Tester Applications: |
| |
Network testing for port discovery, ping test, and hub flash
|
| |
Conducts full cable tests with display of PASS, wiremap, ID, and faults for telco, data, and coax cable
|
| |
Measures cable length
|
| |
Tones and traces cables
|
| |
Wiremaps network connections with remote identifiers
|
| JDSU NT700 LanScaper Network Tester Features: |
| |
Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting such crucial information as network speed, capability and location of switches and other network devices.
|
| |
Pinging function verifies connectivity to network devices and queries PC/NIC's.
|
| |
Detects legacy "Phantom Power", reports current and voltage capability of analog telephone lines, identifies (maps) remotes while cable testing.
|
| |
Conducts link tests to ID speed.
|
| |
Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result.
|
| |
Automatically accesses DHCP host and obtains network information.
|
| |
Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals.
|
| |
Identifies HUBs, NIC, or auto MDI/MDI-X devices.
|
| |
Blinks HUBs to ascertain connected configuration.
|
| |
Displays advertised network speed/duplex.
|
| |
Measures and reports any voltage on lines.
|
| |
Wiremaps network connections with remote identifiers.
|
| |
Generates multiple tone levels for signal tracing and cable identification.
|
| JDSU NT700 LanScaper Network Tester Specifications: |
| NT700: |
LanScaper Network Tester
|
| TP40: |
Cable Assembly, RJ45/alligator clips
|
| TP56: |
12in. Cable Assembly, unshielded, RJ45 connectors
|
| TP20: |
7.5in. Cable Assembly
|
| PC150: |
Cordura Pouch
|
| Instruction Manual: |
Yes
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
