| Datasheet: |
 |
| Photonix PX-D402 LED Source Fiber Optic Test Kit Description: |
Photonix PX-D402 TECHLITE Datarecording Meter and 850-1300 LED Source Premium Grade Fiber Optic Test Kit are intended to allow technicians to perform precise optical measurements in the field.
Photonix PX-D402 and 850-1300 meters, when operated in absolute power mode, are used to determine the level of optical power being emitted from a transmitter.
In relative mode, the meters are used to perform fiber loss measurements or splice tuning operations. The PX-B240 will also store up to 999 readings per wavelength for later upload to a PC for later printiny and analysis.
TECHLITE� meters and sources were designed to be rugged. As with all Photonix test instruments, the internal circuitry is housed within an aluminum extrusion with high impact rubber bumpers. This meter can be driven over with an automobile and has even been known to have survived a 24' drop onto concrete.
When stored in its protective waterproof carry case (included when purchased with a light source as a test kit), the set can even be submerged several feet underwater. In addition, the instruction guide is fully laminated to make it weather resistant and virtually tear-proof.
The included TECHLITE� PX-B220 meter features NIST traceable calibration at 4 wavelengths: 850nM, 1300nM, 1310nM, and 1550nM with measurement power levels as high as +3dBm or as low as -60dBm. The meter also features a true resolution of 0.01dB at ALL power levels thereby allowing the technician to trust measurements below -45dBm.
The TECHLITE� meter, in relative measurement mode, will store the zero reference reading for all four wavelengths independently in non-volatile memory. This allows all zero references to be taken at one time and also allows the unit to be turned off while moving between locations preserve battery life. Also in relative mode, the meters will also
display a 1dB analog type deviation pointer and an unaveraged mini-display for real-time splice tuning.
The TECHLITE� meters utilize a graphic LCD screen to create unusually large and easy to read numbers as graphics to indicate power levels.
|
| Photonix PX-D402 LED Source Fiber Optic Test Kit Applications: |
| |
LED Source Fiber Optic Test Kit for Datacom and LAN applications
|
| Photonix PX-D402 LED Source Fiber Optic Test Kit Characteristics: |
| |
Waterproof carry case
|
| |
True standalone meter
|
| |
850/1300nm source
|
| |
0.01dB resolution with zero reference
|
| |
One hour quick recharger built in
|
| |
Temperature stabilized output
|
| |
Quad wavelength with relative mode
|
| |
Large character graphic display with backlight
|
| |
Interchangable meter adapters
|
| |
Analog type tuning bar
|
| |
Auto power off
|
| |
Data storage of 999 points per wavelength
|
| Photonix PX-D402 LED Source Fiber Optic Test Kit Specifications: |
| Source wavelength: |
850/1300nm
|
| Port style: |
ST, FC, SC, others available (meter); ST (source)
|
| Source P min (dBm): |
-17
|
| Source stability (dB/8hr): |
0.05/0.08
|
| Source bandwidth (nm) |
50/170
|
| Meter range (dBm): |
+3 to -60 (1300/1310/1550nM); +8 to -55 (850nm)
|
| Meter resolution: |
0.01dB
|
| Meter detector: |
Ge
|
| Meter accuracy: |
0.25dB
|
| Modulation (Hz): |
30, 500, 2K
|
| Display: |
DB, dBm
|
| Storage points: |
999 per wavelength
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
