Datasheet:  Protek-6020 |
 |
| Protek 6020R 20 MHz Dual Trace Oscilloscope Description: |
Protek 6020R 20 MHz Dual Trace Oscilloscope is a digital oscilloscope that is light weight with low power consumption in a mhz dual trace
oscilloscope. Protek 6020R has an alternate trigger for a stable display of unrelated signals. Free ground shipping within continental USA.
|
| Protek 6020R 20 MHz Dual Trace Oscilloscope Characteristics: |
| |
20MHz Bandwidth
|
| |
Alt-Mag sweep for simultaneous display of main and X10 magnified trace
|
| |
Alternate trigger for a stable display of unrelated signals
|
| |
X10 Horizontal Magnification
|
| |
P-P auto trigger
|
| |
High brightness CRT with internal graticule
|
| |
Z-axis modulation
|
| |
Light weight with low power consumption
|
| Protek 6020R 20 MHz Dual Trace Oscilloscope Specifications: |
| Vertical Amplifier (CH 1 and CH 2) |
Sensitivity 5mV-Div to 5V-Div in 10 steps (1-2-5 seq)
Accuracy +- 3 percent;
Bandwidth (-3dB) DC- 0Hz to 20MHz, AC- 10Hz to 20MHz;
Rise Time < 17.5ns;
Input Impedance Res- 1MW +-5 percent;
Cap- 25pF 5pF;
Input Coupling AC, DC, GND;
Invert Channel CH2;
Display Modes CH1, CH2, ALT, Chop, ADD, X-Y;
Maximum Input Voltage 400V (DC or AC p-p)
|
| Horizontal Sweep |
Sweep Time 200ns-Div to 0.5s-Div in 20 steps (1-2-5 seq)
(X10 Mag: 20ns-Div to 50ms-Div)
Mag x10
Accuracy ±3 per cent (8 per cent X10 Mag)
Sweep Modes TV, Normal, Auto and p-p Auto
|
| Triggering |
Source CH 1, CH 2, ALT, Line and EXT;
Slope Positive or Negative adjustable levels;
Coupling AC;
Sensitivity (Int) DC to 10MHz (1 Div);
DC to 20MHz (1.5 Div);
Sensitivity (Ext) DC to 10MHz (0.3 p-p);
DC to 20MHz (0.5 p-p);
TV Synch (Int) 2 Div;
TV Synch (Ext) 0.5V p-p;
Auto Triggering > 20Hz;
External Trigger Input Impedance- 1MW +- 5 percent + 20pF Capacitance;
Maximum Input Voltage- 160V (DC or AC peak)
|
| Z Axis Modulation |
Sensitivity 5V p-p
Maximum Input Voltage 50V or AC p-p
Polarity Intensity increases as the voltage increases
Input Resistance 10KW
Bandwidth (-3dB) DC to 1MHz
|
| X-Y Mode |
Inputs X-Axis (CH1), Y-Axis (CH2)
Sensitivity Same as CH1
Accuracy ±5 per cent
Frequency Response (-3dB) DC- 0Hz to 1MHz
AC- 10Hz to 1MHz
Maximum Voltage Same as CH1
X-Y Phase Difference < 3° from DC to 50KHz
|
| Calibrator Signal |
Waveform Square Wave;
Amplitude 0.5V +- 3 percent p-p;
Frequency 1KHz +- 2 percent
|
| CRT |
Size 8cm x 10cm (3.15 inch x 3.94 inch);
Acceleration Voltage 2KV
|
| General Specifications |
Power Requirements AC Input Voltage = -120V or 220V;
Frequency 50/60Hz;
Power Consumption 40W;
Operating Temperature 0 to 40 C (32 to 104 F);
Size 5.1" (H) x 12.5" (W) x 15.75" (D);
Weight 16 lbs
|
| Protek 6020R 20 MHz Dual Trace Oscilloscope Accessories Optional: |
| Accessories |
Manual, Line cord, X1-X10 Probes (2)
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
