| Datasheet: |
 |
| Protek 840FC 40 MHz Hand Held Digital Oscilloscope Description: |
Protek 840FC 40 MHz Hand Held Digital Oscilloscope is a digital oscilloscope with built in high accuracy 6000 count True RMS DMM with USB Host Port and LCD, high resolution color monitor. Protek 840FC oscilloscope has 10 waveforms and setups that may be stored and recalled.
Free ground shipping within continental USA.
|
| Protek 840FC 40 MHz Hand Held Digital Oscilloscope Characteristics: |
| |
Edge-Pulse width, TV-Pattern and Delay trigger modes
|
| |
High Resolution 320x 240 pixel Monochrome LCD
|
| |
USB interface, cable and Software Included
|
| |
10 waveforms and setups may be stored and recalled
|
| |
125KB record length for each channel
|
| |
Includes FFT
|
| |
Help menu
|
| |
Self test and Self calibration
|
| |
20 automatic waveform Measurements
|
| |
2.5GHz Equivalent sampling
|
| |
200MS-s sampling rate single channel and 100MS per channel in dual channel
|
| |
Built in High accuracy 6000 count True RMS DMM
|
| |
40MHz bandwidth
|
| |
USB Host Port and LCD, high resolution color monitor
|
| Protek 840FC 40 MHz Hand Held Digital Oscilloscope Specifications: |
| Other measurements |
Diode Test Accuracy +- 2 percent;
Continuity Buzzer will sound < 60W;
dBm with reference impedances of 2, 4, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300, 600, 900, 1K or 1.2KW
High Current To 600A with external current Clamp
Temperature (with Probe) To 600 C (1112 F)
|
| Capacitance |
Range 60nF to 300 F'
Accuracy +- (2.0 per cent + 10d)
|
| Resistance |
Range 600W to 60MW;
Accuracy +- (0.5 per cent + 10d);
Best Resolution 100mW;
Overload Protection 250V DC or AC peak
|
| AC Volts |
Range 6V to 600V;
Accuracy +- (0.75 per cent + 10d) 50Hz to 1KHz
+-(2.0 per cent r + 10d) 1KHz to 30KHz;
Best Resolution 1mV;
Impedance 10MW;
Overload protection 1000VDC or AC peak
|
| DC Volts |
Range 600mV to 1000V;
Accuracy +- (0.3 per cent + 10d);
Best Resolution 100V;
Impedance 10MW;
Overload protection 1000VDC or AC peak
|
| Measurements |
Types P-P, Max, Amplitude, Top, Base, Pos-Neg over shoot, Pre-shoot, RMS, Mean, One cycle mean, Freq., Period, ±Width, ±Duty cycle, Rise/Fall time, Delay and Phase shift
Math Operations CHA+CHB, CHA-CHB, CHB-CHA, FFT
Cursors DV, DT
FFT Yes
Weighting Rectangular, Hamming, Hanning and Blackman-Harris
Amplitude Display 1, 2, 5, 10dB-Div
Maximum Frequency 1.25GHz
Memory 10 waveforms and settings saved and recalled
|
| Video Trigger |
Video Trigger sensitivity 0.7 Div;
Video Type NTSC, PAL, Secam
|
| Trigger |
Sensitivity 0.5 Div (DC to 5MHz);
Trigger Types Edge, Pulse width, Video;
Coupling AC, DC HF-Reject, LF-Reject, Noise Reject;
Modes Normal, Single, Roll, Auto;
Trigger Level Range +- 20 Div from the center of the screen;
Trigger Level Accuracy +- 0.4 Div;
Trigger Source CHA and CHB
|
| Acquisition System |
Acquisition Modes Sample, Peak detect, Envelope, Average
Sampling Real Time and Equivalent
Sample Rates 200MS-s single channel
100MS/s per channel Dual channel
Equivalent Sampling 2.5GS-s
Sample Rate Accuracy 100ppm
Record Length 125KB-Channel
Waveform Interpolation Dot, Linear, Sine, and Pulse
Peak Detect 10ns minimum
Averages 2 to 256
|
| Horizontal |
Sweep Rate 10ns-Div to 50s-Div;
Time Base Accuracy +- 0.01 per cent
|
| Vertical |
No. Inputs 2;
Analog Bandwidth 40MHz;
Rise Time < 8.75ns;
Sensitivity 5mV to100V-div (in a 1,2,5 sequence);
Resolution 8 bit;
Offset 5 div from the center;
Vertical Accuracy +- 3 percent;
Input Impedance 1MW +- 1 percent;
20pF 1.3pF;
Max. Input Voltage 300V DC or AC peak;
Probe Attenuation x1 and x10
|
| Protek 840FC 40 MHz Hand Held Digital Oscilloscope Accessories Optional: |
| Optional Accessaries |
Carrying Bag, Spare NiMH Rechargeable Battery Pack, 600 Amp Current Probe, Clamp-on current probe
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
