Datasheet:  Protek-860FC |
 |
| Protek 860FC Digital Oscilloscope Description: |
Protek 860FC Digital Oscilloscope(Handheld DSO/DMM with Data Logger and USB Port) has a 60MHz Analog bandwidth. This handheld DSO/DMM is a built in 6000 count DMM for measuring DC and True RMS AC volts, Ohms and Current with optional Currrent Clamp. Free ground shipping within continental USA.
|
| Protek 860FC Digital Oscilloscope Characteristics: |
| |
60MHz Analog bandwidth
|
| |
Up to 200Ms/S sampling rates (100Ms/S Dual channel)
|
| |
High Resolution 3.8". 320 x 240 Pixel Color LCD
|
| |
125Kb record length for each channel
|
| |
Real Time Data logger
|
| |
Built in 6000 count DMM for measuring DC and True RMS AC volts, Ohms and Current with optional Currrent Clamp
|
| |
Horizontal Zoom function and advanced triggering
|
| |
2.5Gs/S Equivilent Sampling rate
|
| |
22 Automatic waveform measurements
|
| |
Auto Scale sets up waveform to the optimum Horizontal and Vertical scale settings
|
| |
Dual channel (A + B), (A - B), and (B - A) waveform math
|
| |
FFT with Hannig, Hamming, Rectangular and Black-Harris weighting
|
| |
Multi-Lingual language help support with a push of a button
|
| |
High Speed USB 2.0 interface and USB Host port are standard features
|
| |
(2) x1 x10 Scope probes, Holster, Battery pack, Software, and USB cable are standard accessories
|
| Protek 860FC Digital Oscilloscope Specifications: |
| Vertical |
No. of inputs 2
Analog Bandwidth 60MHz
Rise Time < 5.83nS
Sensitivity 5mV/Div to 100V/Div in (1-2-5 sequence)
Resolution 8 Bits
Off set ±5% from the center
Vertical accuracy ±3%
Input Impedance 1MW and ±20pF ±1.3pF
Max. Input Volts 300VDC or AC Peak
Probe Attenuation x1 and x10
|
| Horizontal |
Sweep rates 5nS/Div to 50S/Div
Time base Accuracy ±3%
Posistion Range Pre-Trigger: 20Div Max.
Post-Trigger: 1000 Div.
Horizontal Modes: Main Sweep, XY
Delta Time Measurement accuracy ± 3%
|
| Acquistion system |
Acquisition modes Sample, Peak detect, Envelope, Average
Sampling Real Time and Equivilent
Sample Rate rates Up to 200Ms/s Single channel and 100Ms/S Dual Channel
Equivilent Sampling Rate Up to 2.5Gs/S
Sample Rate Accuracy ±100ppm
Record Length 125KB/Channel
Waveform Interpolation Dot, Linear, Sine and Pulse
Peak Detect 10nS minimum
Averages 2 to 256
|
| Trigger |
Sensitivity 0.5Div (DC to 5MHz)
Advanced Trigger types Edge, Pulse width, Video
Coupling AC, DC HF- Reject, LF- Reject, Noise Reject
Mode Normal, Single, Roll and Auto
Trigger Level range ±20Div. from the center of the screen
Trigger Level accuracy ±0.4Div
Trigger Sources ChA and ChB
Trigger Level resolution 500 Pixels
|
| Video |
Video Trigger sensitivity 0.7Div
Video Types NTSC, PAL and SECAM
Video Trigger sources ChA or ChB
Video Triggers Odd/Even frames, All frames, Line number (Lines 5 to 263 within a frame)
|
| Measurements |
Type P-P, Max, Amplitude, Top, Base, Pos/Neg. overshoot, Preshoot, RMS, Mean, One cycle Mean, Freq, Period, ±Width, ±Dutycycle, Rise/Fall time, Delay and Phase shift
|
| Math Operations |
Dual Channel Math ChA + ChB, ChA - ChB, ChB - ChA, FFT
Cursors Voltage: Y1, Y2, ∆V
Time: Y1, Y2, ∆T
|
| FFT |
Weighting Rectangular, Hamming, Hanning, Blackman-Harris
Amplitude display 1dB, 2dB, 5dB, 10dB and 20dB per Division
Maximum Frequency 1.25GHz
|
| Storage |
Memory 10 Waveforms and settings maybe stored and recalled
|
| Datalogging |
Source DMM
Range 10 divisions on the LCD
Record size 256 data points
Time span Auto ranging from 150 Sec to 20 days
Measurement parameters Min., Max. or Avg.
|
| DMM: |
|
| DC Volts |
Ranges 600mV to 1000V
Accuracy ±(0.3% +10d)
Best Resolution 100µV
Input Impedance: 10MW
Overload protection 1000V DC or AC peak
|
| |
Ranges 6V to 600V
Accuracy ±(0.75% +10d) 50Hz to 1KHz
±(2.0% +10d) 1KHz to 30KHz
Best Resolution 1mV
Input Impedance 10MW
Overload protection 1000V DC or AC Peak
|
| Resistance |
Ranges 600W to 60MW
Accuracy ±(0.5% +10d)
Best Resolution 100mW
Overload Protection 250VDC or AC peak
|
| Capacitance |
Ranges 60nF to 300µF
Accuracy ±(2.0% +10d)
Best Resolution 1pF
|
| Diode test |
Accuracy: ±2%
|
| Continuity |
Buzzer will sound: <60W
|
| DB measurements |
DBm reference values (in ohms) 2, 4, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300, 600, 900, 1000, or 2000
|
| Analog bargraph |
60 segment
|
| Current measurement with Optional current clamp |
600A
|
| Power |
9VDC @ 1A AC/DC wall adapter
7.2V NiMh rechargeable, 2800mAH battery pack
|
| Dimensions |
(L x W x D) 4.2" x 8.3" x 2.2"
|
| Weight |
2.6lbs (1.18Kg)
|
| Protek 860FC Digital Oscilloscope Accessories Optional: |
| |
600A clamp on current transducer and carrying bag
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
