Datasheet:  Shimpo-DT-315A-220V |
 |
| Shimpo DT-315A-220V Stroboscope Description: |
Shimpo DT-315A-220V Stroboscope features total portability via its own internal power supply with up to one hour of full time, high intensity flash rate.
Shimpo DT-315A-220V Stroboscope performs as an AC line-powered strobe when plugged into its standard AC adapter/charger unit. Made in Japan.
|
| Shimpo DT-315A-220V Stroboscope Benefits: |
| |
Exceptional durability
|
| |
Allows 4 hours of continuous duty on 1 charge
|
| |
Prevents downtime waiting for unit to cool
|
| |
Enables observer to focus on one particular area of rotating and/or reciprocating machinery
|
| |
Provides reliable measurement results
|
| |
Assures stability in changing temperature environments
|
| |
Unit is automatically synchronized with equipment
|
| |
Enables unit to drive other strobes
|
| |
Extends flash tube
|
| |
Eliminates blind viewing areas
|
| |
Permits easy/accurate adjustments to flash rate
|
| |
Minimizes downtime to only 2 hours
|
| Shimpo DT-315A-220V Stroboscope Characteristics: |
| |
Extruded aluminum construction
|
| |
Internal battery supply
|
| |
Continuous duty cycle
|
| |
Phase shift (in degrees of delay time)
|
| |
Repeatable accuracy
|
| |
Microprocessor-controlled
|
| |
External trigger
|
| |
Synchronous output
|
| |
Flash timer control
|
| |
Highly polished focused reflector
|
| |
Manual flash controller knob
|
| |
Fast recharge cycle
|
| Shimpo DT-315A-220V Stroboscope Specifications: |
| INTERNAL MODE |
|
| Flashing Range |
40.0 - 35,000 FPM (flashes per minute)
|
| Accuracy |
+- 0.01 % of reading
|
| Resolution |
0.1 FPM : 40.0 - 5,000 FPM
0.2 FPM : 5,000 - 8,000 FPM
0.5 FPM : 8,000 - 10,000 FPM
1 FPM : 10,000 - 35,000 FPM
|
| Phase Shift |
Use +/- push buttons (360 in 6 seconds)
|
| Display Update Time |
0.2 seconds approx.
|
| Output Signal |
Synchronous, 400 μsec. Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 KΩ impedance
|
| Rate Multiplier/Divider |
Multiply by 2, divide by 2
|
| EXTERNAL MODE |
|
| Flashing Range |
0.0 to 35,000 FPM
|
| Accuracy |
0.01 % 1 digit
|
| Phase Shift |
0 to 359 with 1 resolution
|
| Delay Time |
0 to 2,000 μsec from 40 - 10,000 FPM
|
| External Trigger Input Signal |
LO level : 0 -0.8 VDC, HI level : 2.5 - 12 VDC or open collector (NPN), pulse width 50 μsec min.
|
| Input Impedance |
4.7 KΩ to 12 V / 6.8 KΩ to 0 V
|
| GENERAL |
|
| Display |
5 digits, 0.4" (10 mm) high, LED
|
| Flash Tube Power/Life |
Xenon, 10 W max. (100 million flashes)
|
| Flash Duration |
10 - 40 μsec
|
| Sensor Power Supply |
12 VDC (40 mA)
|
| Low Battery Indicator |
Display shows all Ls
|
| Power Requirement |
Internal battery pack
|
| Operating Temperature Range |
32 - 104 F ( 0 - 40 C )
|
| Weight |
4.4 lb (2 kg)
|
| Dimensions |
9.84" L x 4.72" W x 4.72" H (250 mm x 120 mm x 120 mm)
|
| Warranty |
1 year
|
| Standard Accessories |
220 VAC Fast Charger
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
