Datasheet: Shimpo-DT-315P |
 |
| Shimpo DT-315P Digital Shimpo Stroboscope Description: |
 Shimpo DT-315P Digital Stroboscope is a rugged, sealed (IP65) Stroboscope suitable for working in areas without AC power.

Equipped with Phase shifting in angle of delay (0-359 degrees) and flash time delay, (0-300 mSec), this stroboscope is engineered for checking speed, timing and wear on rotating and reciprocating machinery. Made in Japan.
 |
| Shimpo DT-315P Digital Shimpo Stroboscope Characteristics: |
| |
 IP65 Sealed Construction
 |
| |
 Extruded Aluminum Construction
 |
| |
 Internal Battery Supply
 |
| |
 Extra Long Flash tube life
 |
| |
 Phase Shift / Time shift flash control
 |
| |
 Internal and External Trigger
 |
| |
 Rubber Boot
 |
| Shimpo DT-315P Digital Shimpo Stroboscope Benefits: |
| |
 Spray and wash down proof; sealed against oil and moisture
 |
| |
 Exceptional Durability
 |
| |
 No power cord to drag around
 |
| |
 Almost no maintenance
 |
| |
 Precise timing/visual inspection in hard to reach areas while machine is running
 |
| |
 Provides flash control by manual or external signal input such as sensors and contact switches
 |
| |
 Protects stroboscope lens and flashtubes life from mishandling
 |
| Shimpo DT-315P Digital Shimpo Stroboscope Specifications: |
| Flash Range |
 100-30,000 FPM
 |
| Accuracy |
 +- 1 digit
 |
| Signal Range |
 200-3,000 rpm/fpm
 |
| Delay Setter |
 Rotary Encoder
 |
| Display |
 4 digit, 10mm high Red LED
 |
| Divide Ratio |
 1/1, 1/2, 1/3, 1/4, 2/4 with shift
 |
| Input Signal |
 High level 50 to 24v pulse width 2 msec min. Lo level 0 to 1v Pulse width 2 msec min. Output impedance less then 10 kΏ
 |
| Input Impedance |
 Input Impedance 47 kΏ
 |
| Display Mode |
 Phase shift (degree), Tachometer
 |
| Flashtube |
 Xenon lamp, max 10 W at 1,5000 rpm
 |
| Operating Temp |
 0 to 40 degree
 |
| Power Requirements |
 115 V AC or 230 V AC Adapter or one (1) hour, internal, rechargeable 12 V battery
 |

Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |