Datasheet:  Shimpo-DT-326 |
 |
| Shimpo DT-326 LED Stroboscope Description: |
Shimpo DT-326 LED Stroboscope Saberstrobe
is an all new LED stroboscope utilizing super bright light emitting diode (LED’s) in an appealing, durable all metal design.
Shimpo DT-326 LED stroboscope provides intuitive ONE HAND controls, wide and adjustable flash rate, brightness and focus control, AC and/or DC operation and silent operation. Made in Japan.
|
| Shimpo DT-326 LED Stroboscope Characteristics: |
| |
Wide Flash Range
|
| |
Ratio Control (Flash Pulse Duration)
|
| |
ECO Mode
|
| |
AC/DC Operation
|
| |
Phase Shift
|
| |
All Metal, Ergonomic Construction
|
| |
Input/Output Connector
|
| Includes: |
Carrying case, AC adapter, Input/Output connector kit, 4 - AA Battery, Manual, Warranty card
|
| Shimpo DT-326 LED Stroboscope Benefits: |
| |
60-120,000 flashes per minute! Meets almost any HIGH-SPEED application.
|
| |
Adjustable Flash duration and Sharp images for critical inspection.
|
| |
Brightness control to conserve battery power
|
| |
AC adapter for continuous use or 4 AA batteries for maximum portability
|
| |
Advance or Retard flash timing for viewing gear teeth, cutting surfaces, repeats or “drifting” images
|
| |
Exceptional durability in a comfortable, hand held or fixed mount stroboscope
|
| |
Trigger the stroboscope externally from printing presses or sensors. Synchronize and control other stroboscopes
|
| Shimpo DT-326 LED Stroboscope Specifications: |
| Unit |
FPM (Flashes Per Minute), Hz (cycles/sec)
|
| Flash Rate Range |
High Range: 60 to 120,000 FPM, 1 to 2,000Hz;
Low Range: 60 to 12,000 FPM, 1 to 200Hz
|
| Flash Rate Accuracy |
0.02 % +- 1 digit at 77 ÌŠ F
|
| Flash Setting Resolution |
0.1 FPM: 60.0 to 3,000.0 FPM;
0.2 FPM: 3,000.2 to 6,000.0 FPM
0.5 FPM: 6,000.5 � 12,000.0 FPM
1 FPM: 60 � 30,000 FPM
2 FPM: 3,000.2 � 60,000 FPM
5 FPM: 100,010 � 120,000 FPM
0.01Hz to 0.1 Hz
|
| Ratio (Flash Duty) |
0.1 to 2.5 ÌŠ (/ 360 ÌŠ ) Setting of every 0.1 ÌŠ
|
| Light Source |
High brightness LEDs
|
| Flash Mode |
Normal and ECO(Power saving mode)
|
| Flash Delay/Phase Shift |
Time: 0 to 999 ms;
Angle: 0 to 359 ÌŠ
|
| Controls |
Power, Multiply by 2, Divide by 2, Phase Shift, Ratio, ECO, Mode setting
|
| External Trigger Input |
Photocoupler input 12mA/DC12V
|
| External Clock Ouput |
Photocoupler output 30mA/DC30V, Pulse width 200μs
|
| Light Power (Illumination/Brightness) |
Normal (6,000 FPM): 1,300 lux: 7.87in (20cm)
200 lux: 19.69in (50cm)
ECO (6,000 FPM): 400 lux: 7.87in (20cm)
100 lux: 19.69in (50cm)
|
| Display |
Backlit LCD (Selectable): Main display: 6 Characters
Sub-display: Flash, Units, Battery, Settings
|
| Display |
Update Continuous
|
| Power Supply (AC/DC Capablility) |
4 each - AA, alkaline battery
|
| Battery Life |
ECO 80 min
Normal 20 min
|
| Standard |
CE
|
| Housing |
Aluminum die cast
|
| Weight |
1.76 oz (500g)
|
| Operating Temperature |
32 to 95 ÌŠ F
|
| Warranty |
2 year warranty
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
