Datasheet:  Shimpo-DT-5TG-1 |
 |
| Shimpo DT-5TG-1 Panel Mount Tachometer Description: |
Shimpo DT-5TG-1 Panel Mount Tachometer is a multi-purpose instrument capable of displaying not only RPM, but also surface speed, flow rate, elapsed time and other units. This panel mount tachometer accepts a variety of modules, enabling it to perform different output functions such as 0-10vdc and 4-20ma, set points (relay closures), RS232C signals, etc.
|
| Shimpo DT-5TG-1 Panel Mount Tachometer Characteristics: |
| |
Fully scalable - Select almost any unit of measure
|
| |
Accepts various modules; works with a variety of sensors - Many output options to select; can match unit with virtually any sensor in the field
|
| |
Highly accurate - Ideal for applications requiring high precision measurements
|
| |
Direct programming - Eliminates need to memorize mathematical formulas
|
| |
Tolerates wide voltage range (85-264VAC 50/60Hz) -Does not require line voltage rewiring
|
| |
Selectable update time - A must for accelerating/decelerating applications
|
| |
Provides DC voltage to power various sensors - Saves money; does not require a separate power supply
|
| |
Easy mounting - Saves time; no hardware required
|
| |
Convenient front panel programming - Parameters are easily visible
|
| |
Self-testing ability - Provides peace of mind
|
| Shimpo DT-5TG-1 Panel Mount Tachometer Specifications: |
| Display Range |
0.0000 - 9.9999, 0.000 - 99.999, 0.00 - 999.99, 0.0 - 9999.9, 0 - 99999
|
| Measuring Range |
10 - 99,999 RPM (at 1 p/r), 0.2 - 30,000 RPM (at 60 p/r)
|
| Accuracy |
+- 0.008 percent +- 1 digit
|
| Display Update Time |
0.25, 0.5, 1, 2, 4, 8, and 16 seconds (selectable)
|
| Time Base |
Controlled by a 4.194304 MHz crystal
|
| Display |
5 digit 0.56 inch (14.2 mm) high LED
|
| Input No. of P/R |
1 to 9,999 (programable)
|
| Input Signal Characteristics |
Sine wave. max. frequency 10 kHz;
Square wave. max. frequency 30 kHz;
Contact closure. max. frequency 20 Hz;
Open collector with 20 μsec minimum
|
| Input Signal Amplitude |
Sine wave (0.3 - 30 VP-P depending on frequency)
Square wave LO : 0 -1.5 V, HI : 4 - 30 V
|
| Input Impedance |
10 KΩ for magnetic pickup, rotary encoder and proximity switch only
|
| Sensor Power Supply |
12 VDC 5 percent (50 mA max.)
|
| Voltage Requirement |
85 - 264 VAC (50/60 Hz) (9 - 35 VDC at 1 W also available
|
| Power Consumption |
1 W (5 W when optional modules are used)
|
| Ambient Temperature |
32 - 113 F ( 0 - 45 C )
|
| Weight |
0.55 lb (250 g)
|
| Dimensions |
3.46 inch L x 3.78 inch W x 1.89 inch H (88 mm x 96 mm x 48 mm)
|
| Warranty |
1 year
|
| Modules |
Accepts 1 output module
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
