| Datasheet: |
 |
| Shimpo Instruments DFS-5R Digital Force Gauge Description: |
Shimpo Instruments DFS-5R Digital Force Gauge is easily user configured for sampling and display update rate, units of measure, baud rate, data output stream, memory type and high and low set points. This digital force gauge features large memory capacity (100 samples) and on board statistical processing allows the DFS series to operate with or without computer control. Discontinued replaced by FGV-5XY.
|
| Shimpo Instruments DFS-5R Digital Force Gauge Benefits: |
| |
Captures events in DT and/or NDT set-ups
|
| |
Records min, max, average and standard deviation
|
| |
Ensures test results are within necessary tolerances for GO/NO-GO tests
|
| |
Exceptional flexibility in data collection and function analysis; full duplex communication ideal for downloading to SPC program
|
| |
Provides flexibility for many testing requirements
|
| |
Prevents load cell damage by automatically terminating test stand operation
|
| |
High overload protection leads to fewer repairs
|
| |
Designed for over one million operations
|
| |
Allows usage in harsh environments
|
| |
Easy calibration; eliminates down time
|
| |
Permits hands-free operation when zeroing the gauge using foot switch or other device
|
| |
Provides for switch opening/closure testing
|
| |
Perfect for even the strictest tolerances
|
| |
Recalled with the push of a button
|
| |
Converts measurements in the gauge
|
| |
Withstands harsh conditions
|
| |
Conveniently determined with the same sensing shaft
|
| |
Prolongs battery life; gauge remains on for daily use
|
| |
Provides ample warning to complete testing (2 hours or more)
|
| Shimpo Instruments DFS-5R Digital Force Gauge Characteristics: |
| |
Reverse Display
|
| |
On board statistical processor
|
| |
Hi and low set points
|
| |
RS232C, digimatic and analog output
|
| |
Selectable display and sampling rates
|
| |
Overload output signal
|
| |
Overload capacity: 200% F.S.
|
| |
Heavy-duty load sensor
|
| |
Temperature compensated load sensing
|
| |
Field calibration through keypad
|
| |
Remote tare
|
| |
Hold function
|
| |
±0.2% F.S. accuracy
|
| |
Peak or present reading displayed
|
| |
Measures force in lbs, kgs or N
|
| |
Rugged die-cast aluminum housing
|
| |
Measures both push and pull forces
|
| |
Auto power shut-off
|
| |
Low battery indicator
|
| Includes: |
AC adapter, batteries, carrying case, overload output cable and 6 attachments (flat head, hook, chisel, notched head, cone & extension rod)
|
| |
Rapid sampling rates as high as 1000 Hz
|
| Shimpo Instruments DFS-5R Digital Force Gauge Specifications: |
| Capacity |
5 lb
2 kg
20 N
|
| Resolution |
0.001 lb
0.001 kg
0.01 N
|
| Accuracy |
±0.2% F.S. + 1/2 digit at 73°F (23°C)
|
| Display |
Four digit LCD, .45" high (11.5 mm) with various indicators including tension and low battery indication
|
| Measuring Mode |
Average, peak compression, peak tension (selectable)
|
| Display Update |
125 ms, 250 ms, 1 sec, 2 sec (selectable)
|
| Sampling Rate |
Average mode: 125 ms, 250 ms, 1 sec, 2 sec
Peak mode: 1 ms, 125 ms, 250 ms, 1 sec, 2 sec
|
| Temperature Coefficient |
Zero: ±0.02% F.S./°C (maximum)
Span: ±0.015% of reading/°C (maximum)
|
| Outputs |
1. RS232C 2. Digimatic: (works with Mitutoyo’s printer model DP-1HS) 3. Analog: (±1 VDC with load impedance of 2K or higher and tare function capability)
|
| Overload Capacity |
200% of F.S.
|
| Comparator Output (Set Points) |
Three open collector NPN transistors for HI, GO, and LO (28 VDC, 7 ma maximum)
|
| Overload Output |
Two open collector NPN transistors: one for tension and one for compression (28 VDC, 5 ma maximum)
|
| Tare and Hold Control |
Relay contact (selectable)
|
| Memory Holds |
100 samples plus statistics (max, min, avg and standard deviation)
|
| Power |
Four AA alkaline batteries (included) last approximately 20 hours in continuous operation
AC adapter (included) for continuous use
|
| Auto Power Shut-Off |
Selectable (3 minutes if there is no activity)
|
| Operating Temperature Range |
32° - 113°F (0° - 45°C)
|
| Dimension |
9.71" L x 3" W x 1.77" H (247 mm x 76 mm x 45 mm)
|
| Weight |
1.2 lb (550 g)
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
