Datasheet:  Shimpo-DT-209X-S12 |
 |
| Shimpo Instruments DT-209X-S12 Hand Held Tachometer Description: |
Shimpo Instruments DT-209X-S12 Hand Held Tachometer is equipped with DATA COLLECTION features that adds flexibility in the field for Maintenance, Quality Control and R&D professionals.
Shimpo Instruments DT-209X-S12 handheld tachometer provides enhanced download features and online controls, showing trending and real time data via USB communication and Analog output. Made in Japan.
|
| Shimpo Instruments DT-209X-S12 Hand Held Tachometer Benefits: |
| |
Collects data instantly
|
| |
Rugged, Reliable and survives tough industrial environment
|
| |
LCD Large, easy to read Display w/ units of measure indicators
|
| |
Permits Contact and Non-Contact measurement (RPM, Linear Rate and LENGTH)
|
| |
For critical MRO and QC rate and LENGTH measurements
|
| |
0.8 - 25.000 RPM, (Contact mode), 6.0 to 99,999 rpm (Non-contact mode) - Converts easily from Contact or Non-Contact testing
|
| |
Nothing extra needed, turn it on and measure. No extra parts needed
|
| |
Data may be collected 3 ways, Graphing capability available for view as it occurs in USB mode. Data saved in .csv format, which can be opened by spreadsheet programs
|
| |
Great for chart recording and simultaneous display of data
|
| |
Safer for high speed applications and confined spaces
|
| |
Allows uninterrupted monitoring, great for life testing, batteries are not used whenever the USB cable is detected
|
| |
Saves battery life for remote operation
|
| |
Time stamps data for better documentation
|
| |
Greater Measuring Flexibility
|
| |
Provides stationary mounting for greater accuracy. (Can be mounted on a tripod or bracket)
|
| Shimpo Instruments DT-209X-S12 Hand Held Tachometer Characteristics: |
| |
Hand held data acquisition
|
| |
All Metal Construction
|
| |
5 digit display
|
| |
Removable Head Assembly Contact and Non-Contact
|
| |
High Accuracy
|
| |
Wide measuring capability
|
| |
Software and USB cable provided
|
| |
Three measuring modes Standard, USB, Average
|
| |
Scalable 1-volt analog output (USB mode)
|
| |
Long Range (1.5 M) Measuring Distance (non-contact LASER)
|
| |
AA Batteries or USB power
|
| |
5 minute auto power off for battery operation
|
| |
Synchronize clock for Standard and Average mode results
|
| |
Multiple Measuring units (Contact and Non-Contact)
|
| |
1/4 x 20 mounting hole
|
| |
12" circumference wheel
|
| Shimpo Instruments DT-209X-S12 Hand Held Tachometer Specifications: |
| Measuring Range |
6 - 99,999 rpm
|
| Measuring Range Contact |
0.8 - 25,000 rpm
|
| Accuracy |
+- 1 rpm: 6 - 8,300 rpm / +- 2 rpm: 8,301 - 25,000 rpm / +- 0.006 % of reading / +- 1 digit (or 7 rpm max.): 25,001 - 99,999 rpm
|
| Display |
5 digit 0.47 inch(12 mm) high LCD
|
| Measuring Unit |
Rpm: (Non Contact up to 14’ away) Contact: ypm, mPM, fpm, ipm and Length; yd, m, ft, in, linear rate and length: using contact adapter included and 12” circumference wheels.
|
| Measuring Mode |
USB mode; PC online measuring / standard (STD) mode; Standard measuring / Average (AVE) mode; Average data measuring
|
| Memory |
STD mode; 24 blocks, 10 points/block (Total; 240 data) AVE mode; 30 blocks (Last, Max, Min, Average data in each block) Date and hour of start/finish are stored in each block. (Can download data with USB communication.)
|
| USB communication |
USB 1.1
|
| Analog output |
Max. 1 V
|
| Display Update Time |
1 second (typical)
|
| Detection |
Laser diode
|
| System Control |
Single-chip C-MOS microprocessor
|
| Over Range Indicator |
Flashing numerals
|
| Voltage Requirement |
2 AA / 1.5 V Batteries
|
| Low Battery Indicator |
Flashing LO BAT display
|
| Auto Power Shut-Off |
Yes (except USB mode)
|
| Battery Life |
15 hrs Approx.
|
| Operating Environment |
Non-corrosive
|
| Operating Temperature Range |
32 - 113 F ( 0 - 45 )
|
| Construction |
Die-cast aluminum housing
|
| Weight |
1.0 pound (460g)
|
| Dimensions |
6.6 L x 2.4 W x 1.8 H inch (167.5 mm x 60 mm x 46 mm)
|
| Warranty |
1 year
|
| Standard Accessories |
Reflective tape, 2 cone adapters, funnel adapter, 3 1/2 inch Extension shaft carrying case, NIST certificate, Master Wheel (6 inch cir.) and 200L adapter, USB cable, case, NIST certificate, Master Wheel (6 inch cir.) and 200L adapter, USB cable, Application software (CD-R)
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
