| Datasheet: |
 |
| TIF Instrument TIF7612 Infrared IR Laser Thermometer Pro Description: |
TIF Instrument TIF7612 Infrared IR Laser Thermometer Pro is a modern infrared ir laser digital non contact, handhelded thermometer very easy to use. Typical Applications: Electrical, HVAC/R, Industrial, Automotive. Model TIF7612 Infrared IR Thermometer PRO has the following features: SoC (System-on-a-Chip) Technology – Complete IR design incorporated on a single chip, creating compact and lightweight design; Innovative optical lens – high accuracy measurements over wide temperature ranges. 12:1 distance to spot (D:S); Laser pointer –Simply point at desired target and press the trigger for temperature reading.
|
| TIF Instrument TIF7612 Infrared IR Laser Thermometer Pro Characteristics: |
| |
SoC (System-on-a-Chip) Technology - Complete IR design incorporated on a single chip, creating compact and lightweight design.
|
| |
Innovative optical lens - high accuracy measurements over wide temperature ranges. 12:1 distance to spot (D:S) ratio.
|
| |
Laser pointer - Simply point at desired target and press the trigger for temperature reading.
|
| |
External temperature port can extend the temperature up to 1999 Degrees F.
|
| |
High and low pass filters with audible alarms for out of range measurements.
|
| |
Temperature modes - Maximum (MAX), Minimum (MIN), Difference (DIF), & Average (AVG) temperature modes.
|
| |
Visual low battery indicators; requires two "AAA" batteries.
|
| TIF Instrument TIF7612 Infrared IR Laser Thermometer Pro Features: |
| Size: |
6.9 x 1.5 x 2.8 in - 175.2 x 39.0 x 71.9 mm
|
| Weight: |
0.30lbs including batteries (AAA*2pcs) - 179 grams including batteries (AAA*2pcs)
|
| Instruction Manual: |
Yes
|
| TIF Instrument TIF7612 Infrared IR Laser Thermometer Pro Specifications: |
| Measurement Range: |
-76 to +932 Degrees F (-60 to +500 Degrees C)
|
| Thermocouple Measurement Range: |
-83.2 to +1999 Degrees F (-64 to +1400 Degrees C)
|
| Accuracy: Tobj=59-95 Degrees F (15-35 Degrees C) Tamb=77 Degrees F (25 Degrees C) |
+/-1.8 Degrees F (1.0 Degree C)
|
| Accuracy: Tobj= -27-932 Degrees F (-33-500 Degrees C) Tamb= 73 Degrees F |
+/-2% of reading or 4 Degrees F (2 Degrees C) whichever is greater
|
| Thermocouple Accuracy: |
+/-1% of reading or 1.8 Degrees F (1 Degree C) whichever is greater (Test under Tamb=73+11 Degrees F [23+6 Degrees C])
|
| Emissivity: |
Adjustable
|
| Resolution: 14.2 Degrees F~199.9 Degrees F (-9.9~199.9 Degrees C): |
0.1 Degree F/C (1 Degree below 9.9 and above 199.9)
|
| Spectral Response: |
8 ~ 14μm
|
| Response Time (90%): |
.5 sec
|
| Distance:Spot: |
12:1
|
| TIF Instrument TIF7612 Infrared IR Laser Thermometer Pro Applications: |
| HVAC/R: |
Furnace exteriors, steam traps, heat exchangers
|
| |
Take suction line temperatures for SUPERHEAT Ambient temperature
|
| |
Ambient temperature
|
| |
Outlet air
|
| |
Inlet air
|
| |
Refrigeration equipment, freezers and display cases AC Condenser Max temp look for blockages
|
| |
Chiller input/output
|
| |
Average over condenser coil for energy audit
|
| Electrical: |
Check temperature of high voltage equipment and transformers from a safe distance
|
| |
Detect heating of problem fuses, wires, insulators, connectors, splices, switches, neutrals
|
| |
Overloads motors due to possible Harmonic currents
|
| Industrial: |
Rotating motors and other machinery
|
| |
Motor starter relay contacts and overloads
|
| |
Bearings
|
| |
Energy surveys and Boiler operations and steam systems
|
| |
Boiler operations and steam systems
|
| |
Performance verifications of machinery and equipment
|
| |
Food processing
|
| Automotive: |
Detect overheating electrical components, connectors and wiring harness
|
| |
Pinpoint radiator core restrictions
|
| |
Temperature sensors
|
| |
Catalytic converters
|
| |
Exhaust systems
|
| |
Tire Tread temperature
|
| |
Battery temperature
|
| |
Oil Temperature
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
