| Datasheet: |
 |
| Tempo 801K Tone and Probe Kit Description: |
Tempo 801K Tone and Probe Kit includes: 77HP/6A High-Power Tone Generator with bent nose piercing clips, 200FP Filter Probe (200FP/50 for export), 700C Dual Carry.
Like our tone generators, Tempo's inductive amplifiers are recognized as industry standards by field service professionals. Used in conjunction with any of our tone generators, our inductive amplifiers permit wire and cable identification without having to make direct metallic contact with the conductor. Powerful receiver gain permits accurate identification in
even the most congested cable bundles and equipment rooms. Includes one each spare duckbill and metal tips.
Tempo 200FP Inductive Amplifier offers the same exceptional qualities as Model 200B, plus an adjustable volume control for more precise identification when tone signal "bleed" is affecting the identification process,
and recessed tabs for buttset or headset connections. In addition, an added LED for visual signal strength indication.
Note: formerly sold as Progressive Electronics.
|
| Tempo 801K Tone and Probe Kit Characteristics: |
| |
LED for visual signal strength indication
|
| |
Continuous On feature
|
| |
5-minute auto shut off
|
| |
Low battery indicator
|
| |
Microprocessor controlled circuitry
|
| |
Slim, comfortable design for use in limited space areas
|
| |
Powerful rear-fire speaker
|
| |
Recessed on/off push button control to conserve battery life
|
| |
Adjustable sensitivity/volume control to increase accuracy
|
| |
Switch to select normal or filter operation
|
| |
Blended carbon/plastic tip to reduce the risk of shorting terminals
|
| |
Recessed tabs for buttset or headset connection
|
| |
1-year warranty
|
| |
Battery operated (9V not included)
|
| Tempo 801K Tone and Probe Kit Features: |
| |
Continuity and polarity test
|
| |
Constant and warble tones
|
| |
Talk battery supply
|
| |
24" test leads (clips)
|
| |
Line 1 modular test lead (RJ-11)
|
| |
3-color LED (identifies AC ring voltage)
|
| |
Weather resistant design
|
| |
Bent nose clips with "bed-of-nails" penetrator
|
| Tempo 801K Tone and Probe Kit Specifications: |
| Specifications of 200FP Filter Tone Probe |
|
| Gain: |
35 decibels
|
| Input impedance: |
100M ohms
|
| Power: |
One 9V battery, nominal life 50 hrs
|
| Probe tip resistance: |
300 ohms minimum
|
| Size: |
1.25 x 1.375 x 9.75", 4.7 oz w/batt
|
| Specifications of 77HP/6A Tone Generator |
|
| High-impact ABS Case: |
1.25 x 2.25 x 2.5, 24” test leads, 4.5 oz. with battery
|
| Power: |
One 9V battery, nominal life, 50 hrs
|
| Transmitter Frequency: |
900/1100Hz alternating, 900Hz constant nominal
|
| Transmitter Power into 600 ohms: |
7 dBm
|
| Voltage Protection at 600 ohms in CONT: |
52 VDC (77HP/6A 60 VDC) (all units provide higher voltage protection in OFF/TONE modes)
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
