SubSurface Instruments PL-2000 Advanced Cable and Pipe Locator

by Subsurface Instruments

Model Number: PL-2000

Description:

SubSurface Instruments PL-2000 Advanced Underground Cable and Pipe Locator is designed with three active frequencies, two passive frequencies, four operation modes, and both direct connection and inductive capabilities. The SubSurface Instruments PL-2000 features four distinct modes of operation: Peak mode - for the most accurate locating and depth measurements. Null mode - for fast, easy tracking, and left/right indication. Distance mode - Longer distance tracking (up to 1.5 longer). Sonde mode - 8kHZ and 512 Hz for locating sewer Sondes and measuring their depths.

Write your own review of this product.

Was $3,575.00

Now $3,275.00

Availability: In stock

You Save: $300.00( 8.39% )

Finance for as low as

Click to Apply Now!
Free Shipping
free shipping
Financing
financing

Product Description

SubSurface Instruments PL-2000 Advanced Underground Cable and Pipe Locator is designed with three active frequencies, two passive frequencies, four operation modes, and both direct connection and inductive capabilities. The SubSurface Instruments PL-2000 features four distinct modes of operation: Peak mode - for the most accurate locating and depth measurements. Null mode - for fast, easy tracking, and left/right indication. Distance mode - Longer distance tracking (up to 1.5 longer). Sonde mode - 8kHZ and 512 Hz for locating sewer Sondes and measuring their depths.

Characteristics

Characteristics: SubSurface Instruments PL-2000 Advanced Underground Cable and Pipe Locator
  Direct connection mode uses 3 watts of power - enabling location over longer distances
  Four modes of operation: Peak mode - for the most accurate locating and depth measurements. Null mode - for fast, easy tracking, and left/right indication. Distance mode - Longer distance tracking (up to 1.5 longer). Sonde mode - 8kHZ and 512 Hz for locating sewer Sondes and measuring their depths
  Three active frequencies: 512 Hz, 8kHz, and 27 KHz. Two passive frequencies: 50/60 cycle flowing AC current and Radio in the 14Khz-25kHz ranges
  Mix mode transmits all active frequencies concurrently in Direct Connect mode
  Capable of detecting and reporting poor ground conductivity at the transmitter while in Direct Connection mode
  Current measurement in the Depth function verifies if user is tracing the correct line in congested utilities
  Automatic shut-off feature for receiver and transmitter when not in use
Warranty 3 year warranty
Subsurface PL-2000 includes 3 Watt Transmitter, Receiver, Red and Black Leads, Ground Stake, Padded Carrying Case, and Operators Manual

Specifications

:Specifications: SubSurface Instruments PL-2000 Underground Advanced Cable and Pipe Locator
Transmitter Specifications:   
Size: 11.0 in x 9.5 in x 4.1 in (29.9 cm x 24.1 cm x 10.4 cm)
Weight: 5.5 lbs (2.5 kg)
Input Power: DC 12 volts (Eight (8) "D" size batteries or external 12v battery)
Battery Life: 20 Hours Typical(Alkaline), 8 Hours at Max Power
Operating Temperature: 14° to 122° F (-10° to 50° C)
Frequency: 26.725 kHz, 8.125 kHz, and 512 Hz
Output Power: 0.5 watts Inductive mode, 3.0 watts Direct mode
Transmitting Mode: Continuous Wave (non-modulating)
Antenna: Single-Coil
Depth Accuracy: Up to 16 feet
Warranty:  3 Years
Receiver Specifications:  
Size: 5.2 in x 11.0 in x 24.0 in (13.2 cm x 27.9 cm x 61.0 cm)
Weight: 4.4 lbs (2.0 kg)
Power Supply: DC 9 Volt (six (6) "AA" batteries)
Battery Life: 8 Hours Continuous (Alkaline)
Operating Temperature: 4° to 122° F (-10° to 50° C)
Frequency Display: 26.725 kHz, 8.125 kHz or .512 Hz
Radio Mode: 15 kHz - 25 kHz
Live Cable Mode: 50/60 Hz AC
Operating Modes: Peak, Null, Dist , and Sonde
Sensitivity: 0 to 40
Warranty:  3 Years

Applications and Videos

Applications:  SubSurface Instruments PL-2000 Underground Advanced Cable and Pipe Locator
   Pipe and Cable Locator

Documents

You May Also Like...