| Specifications | AEMC PEL 102 Power and Energy Logger
|
|
General
|
Sampling Frequency
| 128 samples per cycle; 50/60Hz (16 samples/cycle 400Hz)
|
Data Storage Rate
| 1 per second
|
Demand Period Storage Rate
| User selectable (1,2,3,4,5,6,10,12,15,20,30 and 60 minutes)
|
Recorded Parameters
(Single- and Poly-Phase) | V, I, W, VA, var, PF, Tan, Wh, Vah, varh, THD (V and I), Individual harmonics (from 1 through 50 per phase); Crest Factor (CF), Cos f / DPF
|
Event Log
| Tracks and records status changes and error messages along with recorded data
|
Front Panel Indicator LEDs
| Bluetooth active, recording in progress, phase connection reversal, overload, battery charging and SD Card status
|
Storage Capacity
| 2GB SD card (included) is used for storage. SD cards (up to 2GB); SDHC cards (4 to 32GB) formatted FAT32 are supported
|
Input - Voltage
| 3 voltage Input channels via 4mm safety banana jacks
|
Input - Current
| 3 current Input channels via custom 4 pin jacks that accept AEMC probes and sensor
|
Electrical
|
Voltage Measurement
| Range
| Resolution
| Accuracy (% of Reading)*
|
50/60Hz
| 42.5 to 69Hz
| -
| ± 0.1Hz
|
Single-Phase RMS Voltages
| 100 to 1000rms
| 0.1V
| ± 0.2% Reading ± 0.2V
|
Phase-to-Phase RMS Voltages
| 100 to 2000Vrms
| 0.1 to 1V
| ± 0.2% Reading ± 0.4V
|
400Hz
| 340 to 460Hz
| -
| -
|
Single-Phase RMS Voltages
| 100 to 600Vrms
| 0.1V
| ± 1% Reading ± 1V
|
Phase-to-Phase RMS Voltages
| 200 to 1200Vrms
| 0.1 to 1V
| ± 1% Reading ± 1 V
|
DC
| 100 to 1000V
| 0.1V
| ± 1% Reading ± 3V (typical)
|
PT Ratios
| Programmable from 50V to 65,000V
| 0.01V to 0.1V
| -
|
Current Measurement
|
Current Probe: MiniFlex Sensor MA193***
| 100mA to 100Arms
20 to 400Arms
100 to 2000Arms
500 to 10,000Arms | 1 to 100mA
10 to 100mA
0.1 to 1A
0.1 to 1A
| ± 1% ± 50mA
± 1% ± 0.2A
± 1% ± 1A
± 1%
|
CT Ratios
| Programmable from 1:1 to 25,000:1 (probe dependant)
|
Power Measurements
|
Active Power (P)*
| -2 to 2GW
| 0.001W
| ± 0.5% Reading ± 0.005% Pnom
|
| Reactive Power (Q)* | -2 to 2Gvar
| 0.001var
| ± 1% Reading ± 0.01% Qnom
|
| Apparent Power (S)* | 0 to 2GVA
| 0.001VA
| ± 0.5% Reading ± 0.005% Snom
|
| Power Factor | -1 to +1
| 0.001
| ± 0.05
|
| Tangent F (active/reactive power ratio) | -3.2 to +3.2
| 0.001
| ± 0.02
|
| Energy Measurements |
Active Energy (EP)
| 0 to 4x1018
| 1Wh
| ± 0.5% Reading
|
Reactive Energy (EQ)
| 0 to 4x1018
| 1varh
| ± 2% Reading
|
| Apparent Energy (ES) | 0 to 4x1018 | 1Vah
| ± 0.5% Reading
|
| THD | ± 655%
|
Individual Harmonics
| 1 to 50 displayed in percentage; 1 to 7 at 400Hz |
| External Supply | 11V/250V (10%) @ 50/60Hz; 400Hz
|
| Back-Up Power Source / Charge Time | Rechargeable 8.4V NIMH battery pack / Approximately 5 hours |
| Battery Life | Provides up to 30 minute ride through upon power loss |
| Mechanical |
| Communication Ports | USB 2.0, Ethernet (RJ45) Wireless Bluetooth Class 1 ** |
| Dimension / Weight | 10.08" x 4.92" x 1.46" (256 x 125 x 37mm) / < 2.2lbs (<1kg) |
| Case / Index of Protection | Double Insulated, rubber over-molded, polycarbonate UL94 V1 rated / IP54 non operating |
| Mounting / Security | Embedded magnets on back side, keyhole slot on back side / Kensington anti-theft system |
| Environmental / Safety |
| Operating Temperature/ Relative Humidity | 32° to 122°F (0° to 50°C) / up to 85% |
| Storage Temperature | -4° to 122°F (-20° to 50°C) with batteries; -4°C to 158°F (-20°C to 70°C without batteries)
|
| Safety Rating / CE Rating | Complies with IEC 61010-1: Ed3, and IEC 61010-2-030:Ed1 for 1000V CAT III / 600V CAT IV, Pollution Degree 2 / Yes |
| * Maximum value is current probe dependant. |
| ** Computers with Class II Bluetooth will restrict range to 40ft. Computers withouu Bluetooth will require a Class I or Class II Bluetooth radio adapter. |
| *** Maximum current reduced by a factor of 2 for 400Hz fundamental frequency. |
