Fluke 345 Clamp Meter for Power Quality

Fluke 345 Power Quality Clamp Meter 2654746 (Discontinued)

0 Review(s) Write a Review

DISCONTINUED

Fluke 345 Power Quality Clamp Meter (Mfg part No. 2584181)is ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. This power quality clamp meter features a clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit. For help choosing the right produt, see Fluke's Clamp Meter Selection Guide.

Availability: DISCONTINUED

Description
Features
Specifications
Applications
Resources

The Fluke 345 Clamp Meter for Power Quality is a power quality logger, power analyzer, and a clamp meter all in one. It is ideal for monitoring electronic loads such as electronic lighting, UPS systems, and variable frequency drives. Measures AC current up to 1400A RMS and DC Current up to 2000A without needing to break the circuit due to its Hall Effect clamp meter design.

(0)

Fluke 700P06EX IS Pressure Module

DISCONTINUED

DISCONTINUED

(0)

Fluke 700P08 Pressure Module

DISCONTINUED

DISCONTINUED

(0)

Fluke Y200F Rack Mount Kit for 282/284/292/294 Waveform Generators

DISCONTINUED

DISCONTINUED

(0)

Fluke SW200ARB WaveForm Manager Plus Software

DISCONTINUED

DISCONTINUED

(0)

Fluke Ti300 Thermal Imager with 9Hz Refresh Rate

DISCONTINUED

DISCONTINUED

(0)

Fluke TiS20 Advanced Thermal Infrared Camera

DISCONTINUED

DISCONTINUED

Chracteristics:	Fluke 345 Clamp Meter for Power Quality
	Measures AC current up to 1400A RMS and DC Current up to 2000A without needing to break the circuit due to its Hall Effect clamp meter design
	High Safety rating of 600V CAT IV
	Accurate measurements even in noisy environments
	Data logging capabiliites; able to identify faults
	Measurement of DC Ripple (%) for battery and DC systems
	Able to troubleshoot harmonics; Analyze and log harmonics graphically or digitally
	Inrush current: Analyze and capture nuisance tripping ranging from 3 seconds to 300 seconds
	Easy to use, Full backlit display of trends and waveforms
	3-Phase Power with capibility for balanced loads
	Able to generate reports and view graphs via PC; software included

Display:
Color transmissive LCD	320 x 240 pixels (70 mm diagonal) with 2 level backlight
Power supply:
Battery type	1.5 V Alkaline AA MN 1500 or IEC LR6 x 6
Battery life typically	> 10 hours (backlight on full) > 12 hours (backlight reduced)
Battery Eliminator BE345	Input 110 V/230 V, 50/60 Hz Output 15 V dc, 300 mA
Ambient conditions (For indoor use only):
Reference conditions	All accuracies stated at 23 C 1 C (73.4 F 1.8 F)
Operating temperature	0 C to 50 C (32 F to 122 F)
Temperature coefficient of current	â‰¤ +- 0.15 % of rdg per C
Temperature coefficient of voltage	â‰¤ +- 0.15 % of rdg per C
Maximum relative humidity	80 % for temperatures up to 31 C (87 F) decreasing linearly to 50 % relative humidity at 40 C (104 F)
Maximum operating altitude	2000 m
Electrical safety:
Safety	IEC 61010-1 600 V CAT IV, double or reinforced insulation, pollution degree 2
Protection	IP40; EN60529
Maximum safe working voltages	Current measurement: 600 V ac rms or dc between uninsulated conductor and ground
	Voltage measurement 600 V ac rms or dc between either input terminal and ground, or 825 V between energized phase voltages (delta power config.)
EMC:
Emission	IEC/EN 61326-1:1997 class B
Immunity	IEC/EN 61326-1:1997
Mechanical:
Dimensions (length x width x depth)	300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)
Weight including batteries	820 g/1.8 lb
Jaw opening	60 mm
Jaw capacity	58 mm diameter
Cleaning	The unit can be cleaned with an Isopropanol impregnated cloth. Do not use abrasives or other solvents.

	Set up and troubleshoot variable frequency drives and UPS systems
	Harmonics measurements
	Inrush capture
	Load studies

Fluke 345 Power Quality Clamp Meter 2654746 (Discontinued)

Related Items

Mailing List