Fluke CNX 3000 Multimeter with Wireless CNX Technology

0 Review(s) Write a Review

DISCONTINUED

Fluke CNX 3000 Multimeter with Wireless CNX Technology is a master unit for a Fluke CNX network that facilitates and displays results from a wireless network of up to 3 additional CNX modules for taking multiple simultaneous measurements. Fluke CNX 3000 gathers info from devices up to 20 meters (65.6ft) away and this data can be analyzed with up to a total of 10 devices using the PC software.

Availability: DISCONTINUED

Description
Features
Specifications
Applications
Resources

Specifications:	Fluke CNX 3000 Multimeter with Wireless CNX Technology
AC Voltage
Range ¹	Resolution	Accuracy ² ³
		45 Hz to 500 Hz	500 Hz to 1 kHz
600.0 mV	0.1 mV	1.0 % + 3	2.0 % + 3
6.000 V	0.001 V
60.00 V	0.01 V
600.0 V	0.1 V
1000 V	1 V
¹ All AC voltage ranges are specified from 1 % of range to 100 % of range. ² Crest factor of ≤ 3 at full scale p to 500 V, decreasing linearly to crest factor < 1.5 at 1000 V. ³ For non-sinusoidal waveforms, add –(2 % of reading + 2 % full scale) typical, for crest factor up to 3.
DC Voltage, Continuity, Resistance, Diode Test and Capacitance
Function	Range ¹	Resolution	Accuracy
mV	600.0 mV	0.1 mV	0.09 % + 2
V	6.000 V	0.001 V	0.09 % + 2
	60.00 V	0.01 V
	600.0 V	0.1 V
	1000 V	1 V	0.15 % + 2
)))	600 Ω	1 Ω	Meter beeps at < 25 Ω, beeper detects opens or shorts of 250 μs or longer.
?	600.0 Ω	0.1 Ω	0.5 % + 2
	6.000 kΩ	0.001 kΩ	0.5 % + 1
	60.00 kΩ	0.01 kΩ
	60.00 kΩ	0.1 kΩ
	600.0 kΩ	0.001 MΩ
	50.00 MΩ	0.01 MΩ	1.5 % + 3
Diode test	2.000 V	0.001 V	1 % + 2
µF	1000 nF	1 nF	1.2 % + 2
	10.00 μF	0.01 μF
	100.0 μF	0.1 μF
	9999 μF ¹	1 μF	10 %
¹ In the 9999 μF range for measurements to 1000 μF, the measurement accuracy is 1.2 % + 2.
AC and DC Current
Function	Range ¹	Resolution	Accuracy
mA AC (45 Hz to 1 kHz)	60.00 mA	0.01 mA	1.5 % + 3
	400.0 mA ³	0.1 mA
mA DC ²	60.00 mA	0.01 mA	0.5 % + 3
	400.0 mA	0.1 mA
¹ All AC current ranges are specified from 5 % of range to 100 % of range. ² Input burden voltage (typical): 400 mA input 2 mV/mA. ³ 400.0 mA accuracy specified up to 600 mA overload.
Frequency
Range ¹	Resolution	Accuracy
99.99 Hz	0.01 Hz	0.1 % + 1
999.9 Hz	0.1 Hz
9.999 kHz	0.001 kHz
99.99 kHz	0.01 kHz
¹ Frequency is specified up to 99.99 kHz in volts and up to 10 kHz in amps.
Input Characteristics
Function	Overload Protection	Input Impedance (nominal)	Common Mode Rejection Ratio (1 kΩ unbalance)	Normal Mode Rejection
DC Voltage	1100 V RMS	> 10 MΩ < 100 pF	> 120 dB at DC, 50 Hz or 60 Hz	> 60 dB at 50 Hz or 60 Hz
AC Voltage	1100 V RMS	> 10 MΩ < 100 pF	> 60 dB, DC to 60 Hz
Open circuit test voltage		Full scale		Typical short circuit current
		To 6 MΩ	50 MΩ
Resistance	1100 V RMS	< 0.7 V DC	< 0.9 V DC	< 350 mA
Continuity	1100 V RMS	< 2.7 V DC	2.000 V DC	< 1.1 mA
Function	Overload Protection		Overload
mA	Fused, 44/100 A, 1000 V FAST Fuse		600 mA overload for 2 minutes maximum, 10 minutes rest minimum
MIN/MAX Recording
Function	Accuracy
DC functions	The specified accuracy of the measurement function ± 12 counts for changes > 350 mS in duration
AC functions	The specified accuracy of the measurement function ± 40 counts for changes > 900 mS in duration
General Specifications
Maximum voltage between any terminal and earth ground			1000 V DC or AC RMS
Ω fuse protection from A inputs			0.44 A (44/100 A, 440 mA), 1000 V FAST Fuse, Fluke specified part only
Display (LCD)			Update rate: 4/sec Volts, amps, ohms: 6000 counts Frequency: 10,000 counts Capacitance: 1,000 counts
Battery type			Three AA Alkaline batteries, NEDA 15A IEC LR6
Battery life			300 hours minimum
Temperature			Operating: -10 °C to 50 °C Storage: -40 °C to 60 °C
Relative humidity			0 % to 90 % (0 °C to 35 °C) 0 % to 75 % (35 °C to 40 °C) 0 % to 45 % (40 °C to 50 °C)
Altitude			Operating: 2,000 m Storage: 12,000 m
Temperature coefficient			0.1 X (specified accuracy) /°C (<18 °C or >28 °C)
Wireless frequency			2.4 GHz ISM Band 20 meter range
Size (H x W x L)			4.75 cm x 9.3 cm x 20.7 cm (1.87 in x 3.68 in x 8.14 in)
Weight			340 g (12 oz)
Safety standards			US ANSI: ANSI/ISA 61010-1 / (82.02.01): 3rd edition CSA: CAN/CSA-C22.2 No 61010-1-12: 3rd edition CE European: IEC/EN 61010-1:2010
Electromagnetic compatibility EMI, RFI, EMC, RF			EN 61326-1:2006, EN 61326-2-2:2006 ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489 V1.8.1:2008, FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249 FCCID : T68-FWCS IC:6627A-FWCS
Ingress Protection (IP) rating			IP54

Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

(0)

Fluke 700P05 Pressure Module

DISCONTINUED

DISCONTINUED

(0)

Fluke 700P23 Pressure Module

DISCONTINUED

DISCONTINUED

(0)

Fluke VPS410-B Voltage Probe Set

DISCONTINUED

DISCONTINUED

(0)

Fluke VPS410-V Voltage Probe Set

DISCONTINUED

DISCONTINUED

(0)

Fluke 3310-PR-TF Thin Flex Current Probe

DISCONTINUED

DISCONTINUED

(0)

Fluke BC430 Battery Charger 230v/110v

DISCONTINUED

DISCONTINUED

Characteristics:	Fluke CNX 3000 Multimeter with Wireless CNX Technology
	TRMS Measurement
	Measure AC and DC voltage to 1000V
	Measure AC and DC current with 0.01 mA resolution
	Also measures continuity, resistance, diode test, capacitance and frequency
	Record MIN/MAX
	Safety rated CAT III 1000 V, Cat IV 600 V; IP54
	Data can be analyzed with up to a total of 10 devices using the PC software
	Displays results from a wireless network of up to 3 additional CNX modules
Fluke CNX 3000 includes:	True-RMS Wireless Multimeter, TL175 Test Leads, AC175 Alligator Clips

Applications:	Fluke CNX 3000 Multimeter with Wireless CNX Technology
	Features all measurements for convenient test and measurement troubleshooting
	Detect power interruption
	Measure Single Phase power systems
	Find unbalanced current
	Measure incoming current

Fluke CNX 3000 Multimeter with Wireless CNX Technology

Related Items

Mailing List