| Specifications: | Fluke TiS Thermal Imager Thermal Imaging Scanner
|
Temperature
|
Temperature Range
| -20 °C to +100 °C (-4 °F to +212 °F)
|
Temperature measurement accuracy
| ± 5 °C or 5 % (at 25 °C nominal, whichever is greater)
|
Imaging performance
|
Frequency
| 9 Hz refresh rate
|
Resolution
| 120 X 120 Focal Plane Array, uncooled microbolometer |
Thermal Sensitivity (NETD)
| ≤ 0.1 °C at 30 °C target temp. (100 mK)
|
| Infrared spectral band | 7.5 μm to 14 μm (long wave) |
| Standard infrared lens type | Field of view: 17° x 17°
Spatial resolution: (IFOV) 2.50 mRad
Minimum focus distance: 15 cm (approx. 6 in) |
| Focus mechanism | Versatile, one-handed manual focus |
| Image presentation |
| Palettes | Ironbow, Blue-Red, Grayscale |
| Level and span | Smooth auto-scaling and lock of level and span |
| Minimum span (in auto mode) | 5 °C (9 °F) |
Image capture, review,
save mechanism | One-handed image capture, review, and save capability |
Storage medium
| SD Memory Card (2 GB memory card will store at least 1200
fully radiometric (.is2) IR images annotations, or 3000
basic bitmap (.bmp) images, transferrable to PC via included
multi-format USB card reader |
| File formats | Non-radiometric (.bmp) or fully-radiometric (.is2)
No analysis software required for non-radiometic bitmap (.bmp) files |
Export file formats
w/SmartView® software | BMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFF |
| Memory review | Sequential image navigation and review |
| General specifications |
| Operating temperature | -10 °C to +50 °C (14 °F to 122 °F) |
| Storage temperature | -20 °C to +50 °C (-4 °F to 122 °F) without batteries |
| Relative humidity | 10 % to 95 % non-condensing |
| Display | 9.3 cm (3.7 in) |
| Controls and adjustments | User selectable temperature scale (°C/°F)
Language selection
Time/Date set
User selectable backlight: “Full Bright” or “Auto” |
| Software | SmartView® full analysis and reporting software included |
| Batteries | Internal rechargeable battery pack (included) |
| Battery life | Three to four hours continuous use (assumes 50 % brightness of LCD) |
| Battery charge time | 2.5 hours to full charge |
| AC battery charging | AC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included),
charges battery while imager is operating or turned off,
ac mains adapters included |
| AC operation | AC operation with included power supply (110 V ac to 220 V ac,
50/60 Hz), ac mains adapters included |
| Power saving | Sleep mode activated after five minutes of inactivity, automatic
power off after 30 minutes of inactivity |
| Safety standards | CSA (US and CAN): C22.2 No. 61010-1-04,
UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.0 |
| Electromagnetic compatibility | Meets all applicable requirements in EN61326-1:2006 |
| C Tick | IEC/EN 61326-1 |
| US FCC | CFR 47, Part 15 Class B |
| Vibration | 0.03 g2/Hz (3.8 grms), IEC 68-2-6
|
| Shock | 25 g, IEC 68-2-29
|
Drop
| 2 meter (6.5 feet)
|
| Size (H x W x L) | 26.7 cm x 12.7 cm x 15.2 cm (10.5 in x 5.0 in x 6.0 in) |
| Weight (battery included) | 1.2 kg (2.6 lb) |
| Enclosure rating | IP54 (protected against dust, limited ingress; protection against
water spray from all directions) |
| Warranty | Two-years (standard) |
Recommended calibration cycle
| Two-years (assumes normal operation and normal aging |
| Supported Languages | Czech, English, Finnish, French, German, Italian,
Japanese, Korean, Polish, Portuguese, Russian,
Simplified Chinese, Spanish, Swedish,
Traditional Chinese, Turkish, and
(Dutch and Hungarian in manual only) |
