||Ideal Industries LanTEK II-1000 Cable Certifier
||Height/Width/Depth: 10in. x 5in. x 2.1in. (25.4cm/12.7cm/5.3cm)
|Handset weight w/battery
||Display: 2.4lbs/1.1kg; Remote: 2.3lbs/1.0kg
||Lithium ion, 7.4VDC, 6.6AH; Input: 12V/2A DC; Typical operating time: 18 hours (new
battery running a Cat6 test every 2.5 minutes, full backlight); Charge time: 4 hours quick
charge with battery removed from handset, 6 hours inside handset.
||Handset: DC 12-15V, 2A; Line/mains power: AC 110-240V, 50/60Hz
||4.3” wide screen TFT, 480 x 272 pixel, 95 x 54mm viewable area
||Adapter port: 168 pin ultra low crosstalk, mini-USB device port, USB host port
(display handset only), four pin serial port (service use only), 1/8” talkset jack,
||Non-volatile flash, storage capacity for 1700 TIA-Cat 6 tests with graphs.
Tests can be copied to USB flash drive, up to 64GB.
||Wire map, DC loop resistance length, capacitance, NEXT, insertion loss
(formerly attenuation), ACR-N (formerly ACR), return loss, average
impedance, propagation delay, delay skew, power sum NEXT, power sum
ACR-N (formerly power sum ACR), ACR-F (formerly ELFEXT), power sum
ACR-F (formerly power sum ELFEXT), alien crosstalk (with optional
AXT testing kit)
||0-2000 ft.; 1 ft. resolution, +/-(3% + 3 ft.), distance to short/open reported
|Supported cable types
||TIA/EIA Category 3, 4, 5, 5E, 6 and 6A: 100?
ISO/IEC Class C, D, E, EA, F, FA: 100?
Cat 6/6A Class E/EA RJ-45 permanent link adapters: shielded and
un-shielded cable, universal adapters provide
channel, permanent link and basic link measurements.
||Additional adapters: GG45, ARJ45, TERA, EC7 (MMCPRO3000), Coax 50-75?
(BNC connector), M12 industrial
||Integrated into display and remote handset, compatible with standard
analog inductive probes, selectable tone (high/low/warble) 500/600 Hz,
selectable pin output.
||100V @ 25mA
||0°C to 50°C, non-condensing
||-20°C to 70°C, non-condensing
||MIL-PRF-28800 F, Class 3
||Chinese, Czech, Danish, Dutch, English, French, German,
Italian, Korean, Norwegian, Polish, Portuguese, Russian,
||Baseline: Certified by ETL to meet IEC 61935 Level III/IIIe/IV;
Channel/Permanent link: TIA 568-B.2-2 and IEC 61935 Level III/IIIe/IV
||One (1) Year from date of purchase
Batteries and accessories are warranted 90 days from date of purchase
||Requirements: Microsoft Windows® XP or Vista, (32/64 bit) 512MB RAM,
500MB hard disk + 1GB for every 1,500 Category 6 tests
||Ideal Industries LED FiberTEK FDX
||LanTEK®II (any model)
||User changeable adapter (SC, FC, ST), 2.5mm ferrule
|Power meter accuracy
||± .5dB from 0dBm to -40dBm 850-1550nm; system dynamic range 40dB
||±3%; maximum distance measurement 3000m
||Power/attenuation: 0.1dB, length: 0.1m/0.1f