Photonix PX-D100 Optical Power Meter with 850 LED Light Source

Photonix PX-D100 Highly Accurate Power Meter plus 850 LED Light Source Fiber Optic Test Kit is intended to allow technicians to perform precise optical measurements in the field. The  PX-D100 meter, when operated in absolute power mode, is used to determine the level of optical power being emitted from a transmitter. In relative mode, the meter is used with the included source to perform fiber loss measurements or splice tuning operations. Photonix PX-D100 meter and sources were designed to be rugged. As with all Photonix test instruments, the internal circuitry is housed within an aluminum extrusion with high impact rubber bumpers. This meter can be driven over with an automobile and has even been known to have survived a 24' drop onto concrete. When stored in its protective waterproof carry case (included when purchased with a light source as a test kit), the set can even be submerged several feet underwater. In addition, the instruction guide is fully laminated to make it weather resistant and virtually tear-proof. The included TECHLITE PX-B200 meter features NIST traceable calibration at 4 wavelengths: 850nM, 1300nM, 1310nM, and 1550nM with measurement power levels as high as +3dBm or as low as -60dBm. The meter also features a true resolution of 0.01dB at ALL power levels thereby allowing the technician to trust measurements below -45dBm. The TECHLITE meter, in relative measurement mode, will store the zero reference reading for all four wavelengths independently in non-volatile memory. This allows all zero references to be taken at one time and also allows the unit to be turned off while moving between locations preserve battery life. Also in relative mode, the meters will also display a 1dB analog type deviation pointer and an unaveraged mini-display for real-time splice tuning. The TECHLITE meters utilize a graphic LCD screen to create unusually large and easy to read numbers as graphics to indicate power levels.