Main page content
Photonix PX-D404 Datalogging Power Meter with 1550 Light Source
PX-D404
QVT-2005091014512125782
Photonix PX-D404 Datarecording Meter and 1550 Laser Source Premium Grade Fiber Optic Test Kit are intended to allow technicians to perform precise optical measurements in the field. The meters, when operated in absolute power mode, are used to determine the level of optical power being emitted from a transmitter. In relative mode, the meters are used to perform fiber loss measurements or splice tuning operations. The PX-B240 will also store up to 999 readings per wavelength for later upload to a PC for later printiny and analysis. TECHLITE meters and sources were designed to be rugged. As with all Photonix test instruments, the internal circuitry is housed within an aluminum extrusion with high impact rubber bumpers. This meter can be driven over with an automobile and has even been known to have survived a 24' drop onto concrete. When stored in its protective waterproof carry case (included when purchased with a light source as a test kit), the set can even be submerged several feet underwater. In addition, the instruction guide is fully laminated to make it weather resistant and virtually tear-proof. The included TECHLITE PX-B220 meter features NIST traceable calibration at 4 wavelengths: 850nM, 1300nM, 1310nM, and 1550nM with measurement power levels as high as +3dBm or as low as -60dBm. The meter also features a true resolution of 0.01dB at ALL power levels thereby allowing the technician to trust measurements below -45dBm. The TECHLITE meter, in relative measurement mode, will store the zero reference reading for all four wavelengths independently in non-volatile memory. This allows all zero references to be taken at one time and also allows the unit to be turned off while moving between locations preserve battery life. Also in relative mode, the meters will also display a 1dB analog type deviation pointer and an unaveraged mini-display for real-time splice tuning. The TECHLITE meters utilize a graphic LCD screen to create unusually large and easy to read numbers as graphics to indicate power levels.
Features
| Characteristics: | Photonix PX-D404 Techlite Fiber Optic Test Kit |
| Waterproof carry case | |
| True standalone meter | |
| 1550nm source | |
| 0.01dB resolution with zero reference | |
| One hour quick recharger built in | |
| Quad wavelength with relative mode | |
| Large character graphic display with backlight | |
| Interchangable meter adapters | |
| Analog type tuning bar | |
| Auto power off | |
| Data storage of 999 points per wavelength |
Specifications
| Specifications: | Photonix PX-D404 Techlite Fiber Optic Test Kit |
| Source wavelength: | 1550nm |
| Port style: | ST, FC, SC, others available (meter); ST (source) |
| Source P min (dBm): | -8 |
| Source stability (dB/8hr): | 0.10 |
| Source bandwidth (nm) | 5 |
| Meter range (dBm): | +3 to -60 (1300/1310/1550nM); +8 to -55 (850nm) |
| Meter resolution: | 0.01dB |
| Meter detector: | Ge |
| Meter accuracy: | ±0.25dB |
| Modulation (Hz): | 30, 500, 2K |
| Display: | dB, dBm |
| Storage points: | 999 per wavelength |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Resources
Video Photonix PX-D404 Datalogging Power Meter with 1550 Light Source
