Photonix PX-D700 Optical Power Meter with 850 LED Light Source Set

Photonix PX-D700 Power Meter and 850 LED Light Source Fiber Optic Test Kit offers an economical compromise for those requiring the precise optical measurements. The PX-D700 power meter, when operated in absolute power mode, is used to determine the level of optical power being emitted from a transmitter. In relative mode, the power meter is used with the included source to perform fiber loss measurements or splice tuning operations. TECHLITE meters and LANLITE sources were designed to be rugged. As with all Photonix test instruments, the internal circuitry is housed within an aluminum extrusion with high impact rubber bumpers. Tough enough to be driven over, the sets have even been known to survive a 24 foot drop onto concrete. In its protective waterproof carry case (included when purchased with a light source as a test kit), the set can even be fully submerged. In addition, the instruction guide is fully laminated to make it weather resistant and virtually tear-proof. The included TECHLITE PX-B200 meter features NIST traceable calibration at 4 wavelengths: 850nM, 1300nM, 1310nM, and 1550nM with measurement power levels as high as +3dBm or as low as -60dBm. The meter also features a true resolution of 0.01dB at ALL power levels thereby allowing the technician to trust measurements below -45dBm. The Photonix PX-D700 Power Meter, in relative measurement mode, will store the zero reference reading for all four wavelengths independently in non-volatile memory. This allows all zero references to be taken at one time and also allows the unit to be turned off while moving between locations preserve battery life. Also in relative mode, the meters will also display a 1dB analog type deviation pointer and an unaveraged mini-display for real-time splice tuning. The Photonix PX-D700 Power Meter utilizes a graphic LCD screen to create unusually large and easy to read numbers as graphics to indicate power levels.