| Specifications: | Softing WX4500-FA WireXpert Professional LAN Cable Certifier Kit for Copper |
| Copper Testing |
| Certification Testing | TIA 568-C.2 CAT 5e, 6, 6A, draft CAT 8ISO/IEC 11801, EN 50173 Class D,E,EA,F,FA
draft Class I and Class II Permanent link and channel CAT 5e, 6, 6A, 7, 7A and patch-cord |
| Autotest Time - CAT6A | 9 sec |
| Autotest time - Class FA | 15 sec |
| Max Cable Length for dual ended Autotest | 500m |
| Insertion Cycles | Channel: 10,000 typical
Permanent Link: 5,000 typical |
| Test Parameters | As specified in TIA 1152, IEC 61935-1; including Wiremap |
| Loop Resistance | 0 to 40 O, ±0.1 O |
| Length | 0 to 500m, ±0.5m (dual ended testing) |
| Propagation Delay and Delay Skew | 0 to 5000 ns, ±1 ns |
| Attenuation | 0 to 70 dB, ±0.1dB |
| Pair-to-Pair and Power-Sum NEXT | 0 to 85 dB, ±0.2 dB |
| Pair-to-Pair and Power-Sum ACRF | 0 to 85 dB, ±0.2 dB |
| Return Loss | 0 to 40 dB, ±0.2 dB |
| ACRN, PSACRN | -25 to 85 dB, ±0.5 dB |
| Advanced Diagnostics | Time-domain fault Locator for RL and NEXT |
| Measurement Accuracy | Exceeds TIA 1152 Level IIIe, IEC 61935 level IV |
| Measurement Frequency Range | 1-2, 500 MHz |
| Fiber Testing - SM |
| Wavelengths | 1310nm, 1550nm |
| Autotest Time | 6 seconds for dual ended test |
| Connector Type | SC, LC (optional adapter needed) |
| Test Standard | TIA 568 C.3, IEC 14763-3 |
| Test Parameters |
| Loss | 0 to 31 dB, ±0.2 dB |
| Length | 0 to 20,000m, ±1.5m |
| Output Power | -5 dBm to -9dBm |
| Receiver Sensitivity | -40dBm |
| Fiber Testing - MM |
| Wavelength | 850nm, 1300nm |
| Autotest Time | 6 seconds for dual ended test |
| Connector Type | SC |
| Test Standard | TIA 568 C.3, IEC 14763-3 |
| Test Parameters |
| Loss | 0 to 24 dB, ±0.2 dB |
| Length | 0 to 2,000m, ±1.5m |
| Encircled Flux Compliance | Through external Mode Conditioner |
| Dynamic Range | 24 dB |
| Output Power | -4dBm to -10dBm |
| Receiver Sensitivity | -34 dBm |
| General Specifications |
| Interfaces | Probe Interface, RJ-45 Ethernet, USB host and device, talkset, power jack |
| Display | 6“ industrial LCD, touch sensitive area on bothunits |
| Enclosure | Ruggedized plastic with rubber over-mold, withstands 1.5m drop test on hard surface |
| Remote Unit Abilities | View test results, save tests, start autotest |
| Power Supply | AC 100-240V to 12V, 3A power adapter |
| Input Over-Voltage Protection | Protected against Telco voltages |
| Battery | Removable and rechargeable Li-Ion |
| Battery Capacity | >8 hours continuous operation |
| Internal Storage Capacity | 2000 copper test results with full plot information |
| External Storage | USB Flash Drive |
| Dimensions | 232 X 126 X 87 mm3 (9.1 X 5.0 X 3.4 inch3) |
| Weight | Approx. 1.4 kg (3.0 lb) / unit |
| Supported Languages | Chinese, Czech, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish, Turkish |
| Calibration Period | 1 year |
| Environmental |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 60 °C |
| Relative humidity | 10% to 80% |
