TPI 196 Digital Multimeter

TPI 196 Digital Multimeter with Loop Calibration

On Sale: ~~$223.96~~ $209.96

Retail Price:$239.95

You Save:$29.99(12%)

TPI Instruments 196 Digital Multimeter. 0-24 mA output built in for process loop calibration, 0.05 percent accuracy, 50,000 counts, DMM with separate fuse and battery compartment.

MFG Part No.: 196

Availability: In Stock. Free Shipping.

Quantity

Description
Features
Specifications
Applications
Resources

TPI 196 Digital tester is a DMM with 0 to 24mA output, 50,000 ct. LCD screen, 0.05 % DCV simple precision, max resolution of: 0 to 750 ACV, 100uV, 0 to 1,000 DCV, 0.001mV, 0 to 50M ohm, 0.01 ohm, stability beeper, Alternating Current/Direct Current amps up to 10 amps max resolution 0.01uA, Analog bargraph Min/Max, Data hold, auto-off, fuse/battery have different access points, cULus 61010-1, CAT II-1000VDC, 750VAC, CATIII-600V safety-rated, Ltd. Lifetime Warranty.

(0)

Extech EX210 8 Function Miniature Digital Multimeter Plus IR

FIND REPLACEMENT

Replaced by EX355 (NO IR)

(0)

Amprobe AM-530 TRMS Multimeter for Electrical Contractors

~~$124.99~~ $112.17 Sale

Ships in 5 to 7 Days

Add To Cart

(0)

Greenlee DM-45 Handheld Digital Multimeter

~~$72.85~~ $63.74 Sale

In Stock.

Add To Cart

(0)

UniSource DM-1140B Digital Bench Multimeter with Manual Ranging

~~$199.00~~ $189.05 Sale

In Stock. Free Shipping.

Add To Cart

(0)

Greenlee DM-820A Handheld TRMS Digital Multimeter

~~$286.95~~ $251.08 Sale

In Stock. Free Shipping.

Add To Cart

(0)

Flir DM92 Industrial Digital Multimeter with VFD Filter

FIND REPLACEMENT

Replaced by DM93

Chracteristics:	TPI 196 Digital Multimeter with Loop Calibration
	0.05 % DCV simple precision
	Max resolution of: 0 to 750 ACV, 100uV, 0 to 1,000 DCV, 0.001mV, 0 to 50M ohm, 0.01 ohm
	Stability beeper
	Alternating Current/Direct Current amps up to 10 amps max resolution 0.01uA
	Analog bargraph
	Min/Max, Data hold, auto-off capabilities
	Fuse/battery have different access points
	cULus
	61010-1, CAT II-1000VDC, 750VAC, CATIII-600V safety-rated
	Ltd. Lifetime warranty

DC Volts Maximum Input:	1000V
Maximum Resolution:	0.0001mV
Accuracy:	+/-0.05 percent
AC Volts Maximum Input:	1000V
Maximum Resolution:	.001mV
Accuracy:	+/-0.4 percent
DC Amps Maximum Input:	1A
Maximum Resolution:	0.0001mA
Accuracy:	+/-0.5 percent
AC Amps Maximum Input:	1A
Accuracy:	+/-0.75 percent
Resistance (Ohms) Maximum Input:	50M ohm
Maximum Resolution:	0.01 ohm
Frequency Maximum Input:	500KHz
Maximum Resolution:	0.01Hz
Capacitance	N/A
Inductance	N/A
Temperature (K-Type Thermocouple)	N/A
Continuity	Audible at less than 30 ohm
Diode	3V at 1mA maximum output
Duty Cycle	N/A
True RMS Responding	No
Conductance	No
Pulse Width	No
Data Hold	Yes
Min/Max Record	Yes
Time Stamp Logging	No
Relative Mode	Yes
Compare Mode	Yes
RS-232 Output	Yes, Optically Isolated
Process Loop Output	Yes (0 to 24mA)
Protective Boot	Yes (standard)
Display Type	50,000 count backlit LCD with dual sub displays and analog bargraph
Range Selection	Auto / Manual
Operating Temperature	32 degrees F to 113 degrees F (0 degrees C to 40 degrees C)
Storage Temperature	-4 degrees F to 140 degrees F (-20 degrees C to 60 degrees C)
Humidity	80 percent non-condensing
Size	8.3 inch x 3.7 inch x 1.9 inch (210mm x 95mm x 47mm) without boot 8.7 inch x 4.3 inch x 2.6 (220mm x 110mm x 65mm) with boot
Weight	1.3lbs (570g) without boot; 1.9lbs (850g) with boot
Battery Type	9V Cell Alkaline Battery (NEDA 1604)
Battery Life	50hrs Typical
OverInput Category	CAT III 600V
Agency Approval	cULus 61010-1, IEC 61010-1
Warranty	Limited Lifetime

	Thermocouples in furnaces or gas applications
	Heat anticipator current in thermostats
	Line voltage
	Control circuit voltage
	Flame safeguard control current
	Heating element resistance (continuity)
	Compressor winding resistance
	Contactor and relay coil resistance
	Continuity of wiring
	Motor start and run capacitance
	Frequency on controls and line voltages
	Record min/max voltage of controls and line voltages
	Temperature with optional temperature adapter (A310)
	Bar graph to indicate rapid fluctuations in measurements
	Voltage of direct drive DC motors
	Measure power supply voltage
	Match components
	Compare readings in circuits and components
	Frequency of line and control voltage

TPI 196 Digital Multimeter with Loop Calibration

Related Items

Mailing List