Main page content
TPI 291 700A Digital AC Clamp Meter provides a variety of measurements to meet your needs. TPI 291 700A Digital AC Clamp Meter measures 700 Amps AC, AC/DC voltage, resistance and continuity. The unit features peak hold, data hold, and has a safety rating of CAT III 600V, cULus 61010. Limited, 3-year warranty included.
Features
| Chracteristics: | TPI 291 700A Digital AC Clamp Meter |
| Measures AC Amps to 700 | |
| Measures AC/DC voltage , resistance and continuity | |
| Peak hold and data hold to freeze display | |
| Safety rating of CAT III 600V, cULus 61010 | |
| Three year limited warranty |
Specifications
| DC Voltage | Max Range: 400V; Max Resolution: 0.001V Basic Accuracy: 0.75 percent |
| AC Voltage | Max Range: 600V; Max Resolution: 0.1V Basic Accuracy: 1.2 percent |
| DC Amps | N/A |
| DC Microamps | N/A |
| AC Amps | Max Range: 700A; Max Resolution: 0.01A Basic Accuracy: 1.5 percent |
| Resistance | Max Range: 4K Ohm; Max Resolution: 0.1 Ohm Basic Accuracy: 1 percent |
| Frequency | N/A |
| Capacitance | N/A |
| Temperature | N/A |
| Non-Contact Voltage (NCV) | N/A |
| Continuity Buzzer | <110 Ohm |
| Diode Test | N/A |
| True RMS Response | No |
| Peak Hold | Yes |
| Relative Mode | No |
| Min/Max Record | No |
| Data Hold | Yes |
| Percent Total Harmonic Distortion | No |
| Range Selection | Manual |
| Display Type | 4000 count LCD |
| Operating Temperature | 32 degrees F to 113 degrees F |
| Relative Humidity | 80 percent non-condensing |
| Storage Temperature | -14 degrees F to -131 |
| Battery Type | 9V (MN1604) |
| Battery Life | 80hrs typical |
| Auto Off / Sleep Mode | No |
| Dimensions (H x L x W) | 1.5 inch x 7.25 inch x 2.5 inch |
| Weight | 11.0 oz |
| Agency Approval | CE IEC 61010: CAT III, 600V |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Resources
