TSI 8455-03 Air Velocity Transducer

TSI 8455-03 General Use Air Velocity Transducer with 3in Probe

On Sale: ~~$995.00~~ $895.50

Retail Price:$995.00

You Save:$99.50(10%)

TSI 8455-03 General Purpose Transducer for Air Velocity works as a temporary or permanent installation to take air velocity measurements in a variety of applications. TSI 8455-03 has an on-board circuit that provides signal output as current or voltage for transfer to a data logger or other acquisition system. Includes a 3-inch probe. Made in the USA and includes a NIST Calibration Certificate.

MFG Part No.: 8455-03

Availability: In Stock. Free Shipping.

Price Match Guarantee Yes

Quantity

Description
Features
Specifications
Applications

TSI 8455-03 Air Velocity Transducer is ideal for both temporary and permanent installations for air velocity measurements in research and development labs, manufacturing processes, and other applications. This air velocity transducer contains on-board electronics and calibration curves that provide a linear signal output, which sent out as either a current (mA) or a voltage (V) signal, allowing output to a variety of data loggers or data acquisition systems. Product made in USA and comes with NIST Certificate of Calibration.

(0)

Extech 407119 CFM Hot Wire Anemometer Heavy Duty Design

$569.00

Available for Orders, Coming Soon Free Shipping.

Add To Cart

(0)

Extech AN200-NIST Digital CFM-CMM Thermo-Anemometer

$467.99

Available for Orders, Coming Soon Free Shipping.

Add To Cart

(0)

TSI 8455-09 General Use Air Velocity Transducer with 9in Probe

~~$995.00~~ $895.50 Sale

In Stock. Free Shipping.

Add To Cart

(0)

TSI 8465-03 Windowless Air Velocity Transducer with 3in Probe

~~$1,570.00~~ $1,413.00 Sale

In Stock. Free Shipping.

Add To Cart

(0)

General Tools DLAF8000C 4-in-1 Digital Environmental Meter

~~$175.52~~ $131.74 Sale

In Stock.

Add To Cart

(0)

Amprobe TMA-21HW Digital Hot Wire Anemometer

~~$605.99~~ $499.05 Sale

Available for Orders, Coming Soon Free Shipping.

Add To Cart

	Protected probe tip
	3 inch probe
	Rugged ceramic sensor
	Wide range of measurement applications
	Fast response time
	Range: 25–10,000 ft/min (0.125–50 m/s)
Includes:	Probe attached to 16.4-ft (5-m) cable connected to control module, Compression fittings for mounting in duct work, Two holding clips to mount probe to parallel surface, Operation and service manual, NIST calibration certificate
	Two-year limited warranty

Specifications:	TSI 8455-03 General Purpose Transducer for Air Velocity
Accuracy	±2.0% of reading, ±0.5% of full scale of selected range
Field Selectable Range	25 ft/min to 200, 250, 300, 400, 500, 750, 1,000, 1,250, 1,500, 2,000, 2,500, 3,000, 4,000, 5,000, 7,500, 10,000 ft/min (0.125 m/s to 1.0, 1.25, 1.50, 2.0, 2.5, 3.0, 4.0, 5.0, 7.5, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 40.0, 50.0 m/s)
Repeatability	<±1.0% of reading
Response to Flow	0.2 sec
Temperature Range	Compensation 32 to 140°F (0 to 60°C) Operating (electronics) 32 to 200°F (0 to 93°C) Operating (sensor) 32 to 200°F (0 to 93°C) Storage 32 to 200°F (0 to 93°C)
Resolution (minimum)	0.07% of selected full scale
Input Power	11 to 30 VDC or 18 to 38 VAC, 350 mA max
Probe length	3 in
Output
Impedance	Voltage mode: less than 1 ohm, 20 mA max source current
Resistance	Current mode: 500 ohms maximum load
Signal	Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V, mA, 4 to 20 mA
Time Constant	Field selectable 0.05 to 10 seconds

	Comfort and draft studies
	Critical environment installations (e.g., clean rooms and hospitals)
	Diffuser design analysis
	Monitoring drying processes
	Monitoring air flows in tunnels and subways
	Used as a standard in wind tunnels and calibration facilities
	Environmental monitoring in greenhouses and IAQ applications
	General engineering applications

TSI 8455-03 General Use Air Velocity Transducer with 3in Probe

Related Items

Mailing List