Main page content
TSI 8455-09 General Use Air Velocity Transducer with 9in Probe
8455-09
QVT-2009050610490401772
TSI 8455-09 Air Velocity Transducer is ideal for both temporary and permanent installations for air velocity measurements in research and development labs, manufacturing processes, and other applications. This air velocity transducer contains on-board electronics and calibration curves that provide a linear signal output, which sent out as either a current (mA) or a voltage (V) signal, allowing output to a variety of data loggers or data acquisition systems. Product made in USA and comes with NIST Certificate of Calibration.
Features
| Protected probe tip | |
| 9 inch probe | |
| Rugged ceramic sensor | |
| Wide range of measurement applications | |
| Fast response time | |
| Range: 25 to 10,000 ft/min (0.125 to 50 m/s) | |
| Includes: | Probe attached to 16.4-ft (5-m) cable connected to control module, Compression fittings for mounting in duct work, Two holding clips to mount probe to parallel surface, Operation and service manual, NIST calibration certificate |
| Warranty | Two-year limited warranty |
Specifications
| Specifications: | TSI 8455-09 General Purpose Transducer for Air Velocity |
| Accuracy | ±2.0% of reading, ±0.5% of full scale of selected range |
| Field Selectable Range | 25 ft/min to 200, 250, 300, 400, 500, 750, 1,000, 1,250, 1,500, 2,000, 2,500, 3,000, 4,000, 5,000, 7,500, 10,000 ft/min (0.125 m/s to 1.0, 1.25, 1.50, 2.0, 2.5, 3.0, 4.0, 5.0, 7.5, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 40.0, 50.0 m/s) |
| Repeatability | <±1.0% of reading |
| Response to Flow | 0.2 sec |
| Temperature Range | Compensation 32 to 140°F (0 to 60°C) Operating (electronics) 32 to 200°F (0 to 93°C) Operating (sensor) 32 to 200°F (0 to 93°C) Storage 32 to 200°F (0 to 93°C) |
| Resolution (minimum) | 0.07% of selected full scale |
| Input Power | 11 to 30 VDC or 18 to 38 VAC, 350 mA max |
| Probe length | 9 in |
| Output | |
| Impedance | Voltage mode: less than 1 ohm, 20 mA max source current |
| Resistance | Current mode: 500 ohms maximum load |
| Signal | Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V, mA, 4 to 20 mA |
| Time Constant | Field selectable 0.05 to 10 seconds |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
