TSI 8455-12 TMHSAC Air Velocity Transducer

TSI 8455-12 General Use Air Velocity Transducer with 12in Probe

On Sale: ~~$945.00~~ $850.50

Retail Price:$945.00

You Save:$94.50(10%)

TSI 8455-12 General Purpose Transducer for Air Velocity works as a temporary or permanent installation to take air velocity measurements in a variety of applications. TSI 8455-12 has an on-board circuit that provides signal output as current or voltage for transfer to a data logger or other acquisition system. Includes a 12-inch probe. Made in the USA and includes a NIST Calibration Certificate.

MFG Part No.: 8455-12

Availability: In Stock. Free Shipping.

Price Match Guarantee Yes

Quantity

Description
Features
Specifications
Applications

TSI 8455-12 TMHSAC Air Velocity Transducer is ideal for both temporary and permanent installations for air velocity measurements in research and development labs, manufacturing processes, and other applications. Product made in USA and comes with NIST Certificate of Calibration. This air velocity transducer contains on-board electronics and calibration curves that provide a linear signal output, which sent out as either a current (mA) or a voltage (V) signal, allowing output to a variety of data loggers or data acquisition systems.

(0)

Extech AN100 Digital CFM-CMM Thermo-Anemometer

~~$207.89~~ $193.34 Sale

Ships in 5 to 7 Days

Add To Cart

(0)

General Tools DLAF8000 4-in-1 Digital Air Flow Meter

~~$166.59~~ $131.74 Sale

In Stock.

Add To Cart

(0)

TSI 9545-A Velocicalc Digital Air Velocity Meter with Articulated Probe

~~$1,780.00~~ $1,602.00 Sale

Ships in 5 to 7 Days Free Shipping.

Add To Cart

(0)

TSI 8455-09 General Use Air Velocity Transducer with 9in Probe

~~$945.00~~ $850.50 Sale

In Stock. Free Shipping.

Add To Cart

(0)

TSI 8465-06 Windowless Air Velocity Transducer with 6in Probe

~~$1,460.00~~ $1,314.00 Sale

In Stock. Free Shipping.

Add To Cart

(0)

Testo 410i Wireless Vane Anemometer Smart Probe Technology

~~$149.00~~ $126.65 Sale

In Stock.

Add To Cart

	Protected probe tip
	12 inch probe
	Rugged ceramic sensor
	Wide range of measurement applications
	Fast response time
	Range: 25 to 10,000 ft/min (0.125 to 50 m/s)
Includes:	Probe attached to 16.4-ft (5-m) cable connected to control module, Compression fittings for mounting in duct work, Two holding clips to mount probe to parallel surface, Operation and service manual, NIST calibration certificate
Warranty	Two-year limited warranty

Specifications:	TSI 8455-12 General Purpose Transducer for Air Velocity
Accuracy	±2.0% of reading, ±0.5% of full scale of selected range
Field Selectable Range	25 ft/min to 200, 250, 300, 400, 500, 750, 1,000, 1,250, 1,500, 2,000, 2,500, 3,000, 4,000, 5,000, 7,500, 10,000 ft/min (0.125 m/s to 1.0, 1.25, 1.50, 2.0, 2.5, 3.0, 4.0, 5.0, 7.5, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 40.0, 50.0 m/s)
Repeatability	<±1.0% of reading
Response to Flow	0.2 sec
Temperature Range	Compensation 32 to 140°F (0 to 60°C) Operating (electronics) 32 to 200°F (0 to 93°C) Operating (sensor) 32 to 200°F (0 to 93°C) Storage 32 to 200°F (0 to 93°C)
Resolution (minimum)	0.07% of selected full scale
Input Power	11 to 30 VDC or 18 to 38 VAC, 350 mA max
Probe length	12 in
Output
Impedance	Voltage mode: less than 1 ohm, 20 mA max source current
Resistance	Current mode: 500 ohms maximum load
Signal	Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V, mA, 4 to 20 mA
Time Constant	Field selectable 0.05 to 10 seconds

	Comfort and draft studies
	Critical environment installations (e.g., clean rooms and hospitals)
	Diffuser design analysis
	Monitoring drying processes
	Monitoring air flows in tunnels and subways
	Used as a standard in wind tunnels and calibration facilities
	Environmental monitoring in greenhouses and IAQ applications
	General engineering applications

TSI 8455-12 General Use Air Velocity Transducer with 12in Probe

Related Items

Mailing List