TSI 8475-03 Air Velocity Transducer

TSI 8475-03 Omnidirectional Air Velocity Transducer with 3in Probe

0 Review(s) Write a Review

On Sale: ~~$1,755.00~~ $1,579.50

Retail Price:$1,755.00

You Save:$175.50(10%)

TSI 8475-03 Omnidirectional Transducer for Air Velocity works as a temporary or permanent installation to take air velocity measurements in a variety of applications and is ideal for low velocities and varying direction of flow. TSI 8475-03 has an on-board circuit that provides signal output as current or voltage for transfer to a data logger or other acquisition system. Includes a 3-inch probe. Made in the USA and includes a NIST Calibration Certificate.

MFG Part No.: 8475-03

Availability: In Stock. Free Shipping.

Price Match Guarantee Yes

Quantity

Description
Features
Specifications
Applications

TSI 8475-03 Air Velocity Transducer is ideal for both temporary and permanent installations for air velocity measurements in research and development labs, manufacturing processes, and other applications. This air velocity transducer contains on-board electronics and calibration curves that provide a linear signal output, which sent out as either a current (mA) or a voltage (V) signal, allowing output to a variety of data loggers or data acquisition systems.

(0)

TSI 8475-09 Omnidirectional Air Velocity Transducer with 9in Probe

~~$1,755.00~~ $1,579.50 Sale

In Stock. Free Shipping.

Add To Cart

(0)

Amprobe TMA-21HW Digital Hot Wire Anemometer

~~$605.99~~ $499.05 Sale

Available for Orders, Coming Soon Free Shipping.

Add To Cart

(0)

Kanomax 6501-CE Climomaster with Pressure Sensor and Analog Output

$1,800.00

Available for Orders, Coming Soon Free Shipping.

Add To Cart

(0)

Kanomax 6036-0E Anemomaster Digital Anemometer

$980.00

Available for Orders, Coming Soon Free Shipping.

Add To Cart

(0)

Dwyer AP1-18 Hot Wire Thermo Anemometer With 18 Inch Probe

~~$384.29~~ $316.47 Sale

In Stock.

Add To Cart

(0)

Dwyer 473B-1 Vane Thermo-Anemometer RH Air Velocity and Temperature

~~$794.29~~ $654.12 Sale

In Stock.

Add To Cart

	Omnidirectional probe tip
	3 inch probe
	Protective sleeve
	Ideal for unknown or varying flow direction
	Accurate at low velocities from 10 to 100 ft/min (0.05 to 0.5 m/s)
	NIST calibration certificate
Includes:	Probe attached to 16.4-ft (5-m) cable connected to control module, Compression fittings for mounting in duct work, Two holding clips to mount probe to parallel surface, Operation and service manual
Warranty	Two-year limited warranty

Specifications:	TSI 8475-03 Omnidirectional Transducer for Air Velocity
Accuracy	±2.0% of reading, ±0.5% of full scale of selected range
Field Selectable Range	25 ft/min to 200, 250, 300, 400, 500, 750, 1,000, 1,250, 1,500, 2,000, 2,500, 3,000, 4,000, 5,000, 7,500, 10,000 ft/min (0.125 m/s to 1.0, 1.25, 1.50, 2.0, 2.5, 3.0, 4.0, 5.0, 7.5, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 40.0, 50.0 m/s)
Repeatability	<±1.0% of reading
Response to Flow	0.2 sec
Temperature Range	Compensation 32 to 140°F (0 to 60°C) Operating (electronics) 32 to 200°F (0 to 93°C) Operating (sensor) 32 to 200°F (0 to 93°C) Storage 32 to 200°F (0 to 93°C)
Resolution (minimum)	0.07% of selected full scale
Input Power	11 to 30 VDC or 18 to 38 VAC, 350 mA max
Probe length	3 in
Output
Impedance	Voltage mode: less than 1 ohm, 20 mA max source current
Resistance	Current mode: 500 ohms maximum load
Signal	Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V, mA, 4 to 20 mA
Time Constant	Field selectable 0.05 to 10 seconds

	Comfort and draft studies
	Critical environment installations (e.g., clean rooms and hospitals)
	Diffuser design analysis
	Monitoring drying processes
	Monitoring air flows in tunnels and subways
	Used as a standard in wind tunnels and calibration facilities
	Environmental monitoring in greenhouses and IAQ applications
	General engineering applications

TSI 8475-03 Omnidirectional Air Velocity Transducer with 3in Probe

Related Items

Mailing List