TSI 8475-12 Air Velocity Transducer

TSI 8475-12 Omnidirectional Air Velocity Transducer with 12in Probe

0 Review(s) Write a Review

On Sale: ~~$1,755.00~~ $1,579.50

Retail Price:$1,755.00

You Save:$175.50(10%)

TSI 8475-12 Omnidirectional Air Velocity Transducer with 12in Probe works as a temporary or permanent installation to take air velocity measurements in a variety of applications and is ideal for measuring unknown or varying direction flows. TSI 8475-12 has an on-board circuit that provides signal output as current or voltage for transfer to a data logger or other acquisition system. Includes a 12-inch probe. Made in the USA and includes a NIST Calibration Certificate.

MFG Part No.: 8475-12

Availability: In Stock. Free Shipping.

Price Match Guarantee Yes

Quantity

Description
Features
Specifications
Applications

(0)

Extech 45118 Pocket-Size Thermo-Anemometer

$125.99

Available for Orders, Coming Soon

Add To Cart

(0)

Extech 407119 CFM Hot Wire Anemometer Heavy Duty Design

$569.00

Available for Orders, Coming Soon Free Shipping.

Add To Cart

(0)

TSI 9535-A Velocicalc Digital Air Velocity Meter with Articulated Probe

~~$1,450.00~~ $1,305.00 Sale

In Stock. Free Shipping.

Add To Cart

(0)

TSI 8465-03 Windowless Air Velocity Transducer with 3in Probe

~~$1,570.00~~ $1,413.00 Sale

In Stock. Free Shipping.

Add To Cart

(0)

Alnor AVM410 Velometer Digital Thermal Anemometer

~~$805.00~~ $724.50 Sale

In Stock. Free Shipping.

Add To Cart

(0)

General Tools CIH20DL Hot Wire Anemometer with Datalogging

~~$515.24~~ $386.71 Sale

In Stock. Free Shipping.

Add To Cart

Characteristics	TSI 8475-12 Omnidirectional Air Velocity Transducer with 12in Probe
	12" Omnidirectional Probe
	Protective sleeve
	Great in unknown conditions
	Useful fort low velocities from 10 to 100 ft/min (0.05 to 0.5 m/s)
	NIST calibration certificate
Includes:	Probe attached to 16.4-ft (5-m) cable connected to control module, Compression fittings for mounting in duct work, Two holding clips to mount probe to parallel surface, Operation and service manual
Warranty:	Two-year limited warranty

Specifications:	TSI 8475-12 Omnidirectional Transducer for Air Velocity
Accuracy	±2.0% of reading, ±0.5% of full scale of selected range
Field Selectable Range	25 ft/min to 200, 250, 300, 400, 500, 750, 1,000, 1,250, 1,500, 2,000, 2,500, 3,000, 4,000, 5,000, 7,500, 10,000 ft/min (0.125 m/s to 1.0, 1.25, 1.50, 2.0, 2.5, 3.0, 4.0, 5.0, 7.5, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 40.0, 50.0 m/s)
Repeatability	<±1.0% of reading
Response to Flow	0.2 sec
Temperature Range	Compensation 32 to 140°F (0 to 60°C) Operating (electronics) 32 to 200°F (0 to 93°C) Operating (sensor) 32 to 200°F (0 to 93°C) Storage 32 to 200°F (0 to 93°C)
Resolution (minimum)	0.07% of selected full scale
Input Power	11 to 30 VDC or 18 to 38 VAC, 350 mA max
Probe length	12 in
Output
Impedance	Voltage mode: less than 1 ohm, 20 mA max source current
Resistance	Current mode: 500 ohms maximum load
Signal	Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V, mA, 4 to 20 mA
Time Constant	Field selectable 0.05 to 10 seconds

	Comfort and draft studies
	Critical environment installations (e.g., clean rooms and hospitals)
	Diffuser design analysis
	Monitoring drying processes
	Monitoring air flows in tunnels and subways
	Used as a standard in wind tunnels and calibration facilities
	Environmental monitoring in greenhouses and IAQ applications
	General engineering applications

TSI 8475-12 Omnidirectional Air Velocity Transducer with 12in Probe

Related Items

Mailing List