| Specifications: | UniSource DS-1200 Digital Oscilloscope 200MHz |
| Vertical system |
| Bandwidth | 200MHz |
| Channel | CH1, CH2 |
| Vertical Resolution | 8bit |
| Vertical Sensitivity | 2mV/div -50V/div, 1-2-5 14 step |
| Simulation bandwidth | -3dB |
| Rising time | ≤1.8ns (200MHz), ≤3.5ns (100MHz),
≤5.8ns (60MHz),≤8.7ns (40MHz), ≤14ns (25MHz) |
| Input impedance | 1MΩ ±2%, 20pF±5 |
| Max safe input voltage | 400V(DC+AC peak) / frequency≤400Hz
(when input impedance is 1MΩ) |
| Horizontal system |
| Mode | CH1, CH2, CH1±CH2, CH1×CH2, CH1/CH2, FFT |
| Sampling Rate | 500MS/s ~ 1GS/s |
| Equivalent sampling rate | 50GS/s |
| Waveform interpolation | Sin(x)/x |
| Record length | ≥4kB/CH, expandable to 256MB or 512MB |
| Horizontal working mode | Primary sweep, primary sweep + delay expansion sweep and X-Y / 1-2-5 |
| Timebase range | 50s/div~1ns/div(200MHz),
50s/div~5ns/div(100MHz)
50s/div~10ns/div(60MHz, 40MHz),
50s/div~20ns/div(25MHz) |
| Timebase accuracy | ±100ppm |
| X-Y | X (CH1) frequency bandwidth : DC ~ full bandwidth (-3dB)
Phase potential difference :≤3° when 5MHz
|
| Trigger |
| Trigger source | CH1, CH2, EXT, city electricity |
| Trigger sensitivity | inner:≥1div (frequency upper limit is 40MHz)
≥2div (frequency is more than 40MHz)
≥2div, ?V, ?T, 1/?T
out :≥100mVp-p frequency upper limit is 40MHz
≥200mVp-p frequency is more than 40MHz
≥200mVp-p, TV-V, TV-H video trigger
|
Auto trigger range
| 100Hz~100MHz square signal |
| Trigger level range | Int. trigger:±4div / Ext. trigger:±1.6V |
| Trigger mode | Edge trigger : Rise along, drop along
Impulse trigger : More than, equal to and less than setting pulse width.
Video trigger : TV-V, TV-H
Slope trigger :more than, equal to and less than setting time
|
| Cursors |
| Measurement | ?V, ?T, 1/?T |
| Auto measure | •Voltage parameter:
Max, Min, peak-peak value, top value, bottom value, amplitude value,
root-mean-square value, average value, overshot, pre-shot, damp.
•Time parameter:
Cycle, frequency, rising time, fall time, positive pulse width, negative pulse width,
positive ratio, negative ratio, delay 1-2 |
| General |
| Display | 5.7 inch color LCD display |
| Display screen | 320 pixel (horizontal) × 234 pixel (vertical) |
| Display type | dot, vector |
| Display mode | Normal, Flat, Average, Peak value, Afterglow |
| Output interface | USB, RS232, J45 Ethernet interface(Optional) |
| Storage | Setting / Waveform storage : 10 groups |
| Power supply | AC 100V~240V ±10% / 45Hz~440H / about 25W |
| Temperature | Working: 0?~+40? / Storage : -40?~+60? |
| Humidity | Working : 40? / (20~90)%RH / Storage : 50? / 90%RH, 24h |
| Size/ Weight | 300mm×150mm×130mm / 2.5Kg (net weight) |
