Fieldpiece JL3PR Pressure Probe Wireless for Job Link System

• Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or Android™ 5.0 (Latest compatibility at www.fieldpiece.com)
• Sensor Type: Relative pressure
• Connector Type: Standard 1/4? NPT female flare fitting (angled)
• Measurement Range: 29” HgV to 580 psig, 74 cmHgV to 0 to 4000 kPa
• Accuracy:
• 29” HgV to 0” HgV: ±0.2” HgV; 74 cmHgV to 0 cmHgV: ±1 cmHgV
• 0 to 200 psig: ±1 psig; 0 to 1378 kPa: ±7 kPa
• 200 to 580 psig: ±2 psig; 1378 to 4000 kPa: ±14 kPa
• Maximum Overload Pressure: 800 psig (5500 kPa)
• Battery Type: 2 x AAA, NEDA 24A, IEC LR03
• Battery Life: 150 hours typical alkaline. LED blinks red when battery replacement is needed.
• Auto Power Off: 2 hours (APO can be disabled)
• Wireless Range: 1000 feet (305 meters) line of sight. Obstructions affect distance.
• Radio Frequency: 2.4 GHz
• Operating Environment: 32°F to 122°F (0°C to 50°C) at <75% RH
• Storage Temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with batteries removed)
• Temperature Coefficient: 0.1 x (specified accuracy) per 1.8°F (32°F to 64°F, 82°F to 122°F), per 1°C (0°C to 18°C, 28°C to 50°C)
• Weight: 0.39 lbs (177 g)
• Water Resistant: Designed to IP55

Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• 45° angled fitting easily connects in tight spaces
• Pressure sensors are accurate at any elevation
• Calibrates automatically to barometric pressure