Fluke 805 FC Handheld Vibration Meter

Fluke 805 FC Portable Vibration Meter

0 Review(s) Write a Review

On Sale: $2,805.99

Fluke 805 FC Handheld Vibration Meter measures vibrations from 10 Hz to 1,00 Hz on the low frequency range and from 4,000 Hz to 20,000 Hz on the high frequency range. The Fluke 805 FC features a four level severity scale for quick reference, exportable data via USB, Fluke Connect capabilities, data logging of up to 3,500 measurements, convenient indication of how much pressure needs to be applied to get accurate readings, and more.

MFG Part No.: 4489229

Availability: Available for Orders, Coming Soon Free Shipping.

Free Gift: Fluke Free Product Promo

Price Match Guarantee Yes

Quantity

Description
Features
Specifications
Applications
Resources

Specifications:	Fluke 805 FC Portable Vibration Meter
Vibration Meter
Low frequency range (overall measurement)	10 Hz to 1,000 Hz
High frequency range (CF+ measurement)	4,000 Hz to 20,000 Hz
Severity levels	Good, Satisfactory, Unsatisfactory, Unacceptable
Vibration limit	50 g peak (100 g peak-peak)
A/D converter	16-bit
Signal to noise ratio	80 dB
Sampling rate	-
Low frequency	20,000 Hz
High frequency	80,000 Hz
Real time clock backup	Coin battery
Sensor
Sensitivity	100 mV / g ± 10%
Measurement range	0.01 g to 50 g
Low frequency range (overall measurement)	10 Hz to 1,000 Hz
High frequency range (CF+ measurement)	4,000 Hz to 20,000 Hz
Resolution	0.01 g
Accuracy	At 100 Hz ± 5 % of measured value
Amplitude units
Acceleration	g, m/sec2
Velocity	in/sec, mm/sec
Displacement	mils, mm
Infrared thermometer (temperature measurement)
Range	-20 °C to 200 °C (-4 °F to 392 °F)
Accuracy	±2 °C (4 °F)
Focal length	Fixed, at ~3.8 cm (1.5″)
External sensor Note: Fluke supports, but does not provide, external sensors.
Frequency range	10 Hz to 1,000 Hz
Bias voltage (to supply power)	20 V dc to 22 V dc
Bias Current (to supply power)	Maximum 5 mA
Firmware
Calibration	Factory calibration required
External interfaces	USB 2.0 (full speed) communication
Data capacity	Database on internal flash memory
Upgrade	through USB
Memory	Up to 3,500 measurements
Radiated emission
Electrostatic discharge: Burst	Standard EN 61000-4-2
Electromagnetic interference	Standard EN 61000-4-3
RE	Standard CISPR 11, Class A
Environmental
Operating temperature	-20 °C to 50 °C (-4 °F to 122 °F)
Storage temperature	-30 °C to 80 °C (-22 °F to 176 °F)
Operating humidity	10 % to 95 % RH (non-condensing)
Operating/ Storage altitude	Sea Level to 3,048 meters (10,000 feet)
IP rating	IP54
Vibration limit	500 g peak
Drop test	1 meter
General specifications
Battery type	AA (2) Lithium Iron Disulfide
Battery life	250 measurements
Size (L x W x H)	25.72 cm x 16.19 cm x 9.84 cm (10.13 in x 6.38 in x 3.875 in)
Weight	1.16 kg (2.55 lb)
Fluke Connect™ mobile app compatible*	Yes
Connectors	USB mini-B 7-pin, external sensor jack (SMB connector)

*RF connection time (binding time) can take up to 1 minute.

Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.