Fieldpiece SC680 Clamp Meter 600 AC/DC Swivel Head and Dual Display, for Job Link System

• Display: 10000 count dual display
• Backlight: 5 minute duration with auto-off, blue color
• Overrange: “OL” or “-OL” is displayed
• Measurement rate: 3.3 times per second, nominal
• Zero: Automatic
• Operating environment: 32°F to 122°F (0°C to 50°C) at <70%RH
• Storage temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80%RH (with battery removed)
• Accuracy: Stated accuracy @ 73°F±9°F (23°C±5°C), <75%RH
• Temperature coefficient: 0.1 x (specified accuracy) per °C [0°C to 19°C (32°F to 66°F), 28°C to 50° C (82°F to 122°F)]
• APO (Auto Power Off): Approx. 30 minutes
• Power: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22
• Battery life: 100 hours typical alkaline (No wireless, no backlight)
• Low battery indication: Battery icon blinks and “batt” is displayed when the battery voltage drops below the operating level
• Dimensions: 301.5mm(H) x 79.5mm(W) x 50.0mm(D)
• Weight: Approx. 480g including battery
• Altitude: Up to 6562 ft (2000m)
• Overload protection: 1000VDC or 750VAC rms unless otherwise stated
• Test leads: Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or above
• Included test leads are gold-plated and have removable safety caps

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Fieldpiece Job Link App and the new SC680 and SC480 HVAC Power Clamp Meters