Fluke 884X-RDT100 Ohm RDT Temperature Probe

0 Review(s) Write a Review

DISCONTINUED

Fluke 884X-RDT 100 Ohm RDT Temperature Probe. Mfg Part Fluke 2675468. Manufactured using a coil suspension element design for increased shock and vibration resistance. Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability.

Availability: DISCONTINUED

Description
Specifications
Resources

Fluke 884X-RDT 100 Ohm RDT Temperature Probe. Mfg Part 2675468. Manufactured using a coil suspension element design for increased shock and vibration resistance. Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability.

(0)

Fluke 700P04 Pressure Module

DISCONTINUED

DISCONTINUED

(0)

Fluke TPS FLEX 24-TF 200/1000A Fluke 1760 Thin Flexi

DISCONTINUED

DISCONTINUED

(0)

Fluke Fluke-190-204/AM Color ScopeMeter 200 MHz 4 Channels

DISCONTINUED

DISCONTINUED

(0)

Fluke 435-II Advanced Energy and Power Quality Analyzer

DISCONTINUED

DISCONTINUED

(0)

Fluke Ti9 Thermal Imager

DISCONTINUED

DISCONTINUED

(0)

Fluke TiS40 (Replaced by Fluke TiS60)

DISCONTINUED

DISCONTINUED

Specifications:	Fluke 884X-RDT100 Ohm RDT Temperature Probe
Resistance	Nominal 100 Ohm
Temperature coefficient	0.00385 ohm/ohm degrees C nominal
Temperature range	-200 C to 300 degrees C (transition and cable temperature: 0 degrees C to 150 degrees C)
Drift rate	+ 0.13 degrees C at 0 degrees C after 1000 hours at 300 degrees C
Sheath Material	316 stainless steel
Leads	Teflon-insulated, nickel-plated stranded copper, 22 AWG
Termination	4-wire banana
Time constant	Four seconds maximum for 63.2 percent response to step change in water moving at 3 fps
Bending radius	19 mm (3/4 in) except for 50 mm (2 in) area of sheath near tip
Calibration	Includes manufacturer's NIST-traceable calibration and table with R vs. T values in 1 degrees C increments from -196 degrees C to 300 degrees C. Callendar-van Dusen coefficients included
Immersion	At least 100 mm (4 in) recommended
Accuracy (includes calibration uncertainty and short-term stability) ±0.50 degrees C at -196 degrees	±0.050 degrees C at 0 degrees C; ±0.052 degrees C at 200 degrees C; ±0.055 degrees C at 300 degrees C;
Size	9 in L x 3/16 in diameter
Marking	Each RTD is marked with the Fluke name and part number

Fluke 884X-RDT100 Ohm RDT Temperature Probe

Related Items

Mailing List