Fluke TiR4/FT-20 Thermal Imager with Fusion

0 Review(s) Write a Review

DISCONTINUED

Fluke TiR4/FT-20 Thermal Imager with Fusion aligns both visual image and an infrared image on the same screen. Gives off high quality photos, even with the 180° articulating lens. Perfect for doing: roofing surveys, energy audits, moisture/restoration, mold, remediation. The Fluke TiR4, compared to the TiR3, has more measurement modes (full list in specifications), the thermal sensitivty, and comes with user defined text annotations.

Availability: DISCONTINUED

Description
Features
Specifications
Applications
Resources

Fluke TiR4/FT-20 Thermal Imager with Fusion is for professionals demanding the best solutions for building diagnostic applications.Using the IR-Fusion, both a visual (visible light) image and an infrared image are captured and aligned on the same screen for a more accurate view at any distance. The FlirTiR4 provides high quality results and photos, but managing to keep the leading thermal sensitivity. Easily see around obstacles with the 180° articulating lens. Fluke TiR4 Thermal Imager is perfect for doing tasks such as but not limited to: roofing surveys, energy audits, moisture/restoration, mold remediation. All models come with: heavy-duty carrying case, 2 recharagble battery packs, battery charger, video cable, 512 MB compact flash card, compact flash card reader, USB cable, neck strap, SmartView reporting and analysis software on CD. TiR4, compared to the TiR3, has more measurement modes (full list in specifications), the thermal sensitivty, and comes with user defined text annotations.

Specifications	Fluke Tir4/FT-20 Thermal Imager with Fusion
Temperature Performance
Temperature Range	-20 °C to 100 °C (-4 °F to 212 °F)
Fully Radiometric	76,800 calibrated pixels
Accuracy	±2 °C or 2%
Emissivity Correction	0.1 to 1.0 (0.01 increments)
Measurement Modes	Centerpoint, center box (area min/max, average) moveable spots/boxes, user defined field/text annotations, isotherms, automatic hot and cold point detection, visible color alarm above and below
Imaging Performance
Resolution	320 x 240
Frequency	60
Field of View (FOV)	23° horizontal x 17° vertical
Spatial Resolution (IFOV)	1.30 mrad
Min. Focus Distance	0.15 m
Thermal Sensitivity (NETD)	0.05 °C at 30 °C - (50mK)
Focus	Smart Focus: one finger continuous focus
Image Presentation
Digital Display	5" LCD
Video Out	RS170 EIA/NTSC or CCIR/PAL composite video
Palettes	Grayscale, grayscale inverted, blue red, high contrast, hot metal, ironbow, amber, amber inverted
LCD Backlight	Sunlight readable color LCD
Other
Software Included	SmartView
Storage Medium	1000 IR images on compact flash card (1 GB) Flash Memory
Laser Pointer	Yes
Built-in Visible Light Camera	Yes
Fusion	Yes
Picture-In-Picture
IR/Visible Alarm on Camera	Yes
Flash and Torch Light	Yes
180° Articulating Lens	Yes
Optional Lenses	Yes
Windows CE Based Menu	Yes
AutoCapture	Yes
On Board Analysis Functions	Yes
Text Annotation	Yes
Warranty (years):	2
Mechanical and General Specifications
Operating Temperature	-10° C to +50° C (14° F to 122° F)
Storage Temperature	-40° C to +70° C (-40° C to 158° F)
Relative Humidity	Operating and storage 10% to 95%, non-condensing
Water and Dust Resistant	IP54
Optional Lenses
54 mm Telephoto Lens	High precision germanium lens
Field of View (FOV)	9 degree horizontal x 6 degree vertical
Spatial Resolution (IFOV)	0.94 mrad
Min Focus Distance	0.6 m
10.5 mm Wide Angle Lens	High precision germanium lens
Field of View (FOV)	42 degree horizontal x 32 degree vertical
Spatial resolution (IFOV)	2.45 mrad
Min Focus Distance	0.3 m

Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

(0)

Fluke TiR29 60Hz Thermal Imager

DISCONTINUED

DISCONTINUED

(0)

Fluke FS17XX-1PH-TF 3000a 1ph Fluke 1735 and 174x Thin Flexi

DISCONTINUED

DISCONTINUED

(0)

Fluke I5A/50A Clamp PQ3 3-Phase 5a/50a Mini Current Clamp Set

DISCONTINUED

DISCONTINUED

(0)

Fluke TPS CF-CARD EP2523A Compact Flash Card 2GB

DISCONTINUED

DISCONTINUED

(0)

Fluke 434-II Energy and Power Quality Analyzer

DISCONTINUED

DISCONTINUED

(0)

Fluke 435-II/Basic Advanced Energy and Power Quality Analyzer

DISCONTINUED

DISCONTINUED

Characteristics	Fluke TiR4/FT-20 Thermal Imager with Fusion
	Industry leading thermal sensitivity provides fine resolution, and ultra high-quality images
	IR-Fusion technology automatically merges visual and thermal images, pinpointing trouble areas quicker by automatically relating thermal images with the real world. IR-Fusion is included with all models
	The 180° articulating lens is great for viewing around obstructions
	Large, 5” high resolution, high contrast display
	A Vanadium Oxide focal plane array (to 320 by 240 pixels) and 20 mm high quality Germanium lens with continuous single finger focus provide exceptional image resolution
	SmartView professional report writing software generates fast, easy customizable reports including rich image analysis with free updates for the life of your product
	The intuitive operation with on-camera Windows CE interface makes it easy to use
All models come with:	Heavy-duty carrying case, 2 recharagble battery packs, battery charger, video cable, 512 MB compact flash card, compact flash card reader, USB cable, neck strap, SmartView reporting and analysis software on CD
	<strong>TiR4, compared to the TiR3, has more measurement modes (full list in specifications), the thermal sensitivty, and comes with user defined text annotations. </strong>

Applications:	Fluke TiR4/FT-20 Thermal Imager with Fusion
	Perfect for doing: roofing surveys, energy audits, moisture/restoration, mold, remediation.

Fluke TiR4/FT-20 Thermal Imager with Fusion

Related Items

Mailing List