TPI 460 Hand Held Oscilloscope

0 Review(s) Write a Review

On Sale: ~~$968.47~~ $907.94

Retail Price:$995.00

You Save:$87.06(9%)

TPI 460 Hand Held Oscilloscope features a 3 inch x 3 inch cold cathode fluorescent display providing test data in a clear easy to see format. The cursor readout function allows the width and amplitude of a signal to be measured precisely and automatically. Free ground shipping within continental USA.

MFG Part No.: 460

Availability: In Stock.

Price Match Guarantee Yes

Quantity

Description
Features
Specifications
Applications

TPI 460 Hand Held Oscilloscope features 20 MHz Bandwidth Capture signals from AC/DC drive motors, sensors, actuators, line and control voltages, UPS and industrial machines. Cursor Readout-Measure the width and amplitude of the signaland display it on the screen instead of trying to figure it out manually. Trend Mode Graph readings over a predetermined time period to check for surges or dropouts. Dual Input View two waveforms on the display for comparison and troubleshooting. True RMS DMM Measure AC/DC volts up to 600V, frequency to 20 MHz, and resistance to 20 Meg ohm. Obtain accurate measurements of non-sinusoidal AC voltage and current waveforms found in controls and circuits with True RMS. Real Time Sample Rate Capture spikes and dropouts of industrial signals with real time sampling of 25 megasamples per second. Bright LCD Backlight Adjust brightness levels for clarity in any light condition. Optically Isolated RS232 Output Transfer data safely without a direct connection to your computer's circuitry. Free ground shipping within continental USA.

Specifications:	TPI 460 Hand Held Oscilloscope
DISPLAY
Size	3 inch x 3 inch (76mm x 76mm)
Pixels	240 x 240
Backlight	Yes
POWER
External	5V DC power supply (Included)
Internal	4.8V DC rechargeable battery
Operating Time	2.5 Hours with backlight on
MEMORY
Waveform	Save 2 full screens
Setup	Saves user settings
VERTICAL
Sample Rate	(-3dB) Real Time: 25 Megasamples per Second up to 2 MHz
Equivalent Time:	500 Megasamples per Second > 2 MHz
Bandwidth	20 MHz w/SP60B 10:1 Probe 10 MHz w/Shielded Test Leads
Resolution	8 bits
Channels	2
Coupling	AC, DC AC, DC, GND (max: 750V)
Input Impedance	Approximately 1M Ohm
Sensitivity	50mV TO 200V/div 1,2,5 Sequence
Accuracy	± 3 percent ± (3 percent + 0.05 range/div)
Trigger Position	Ver1;Fixed Position / Ver3; Adjustable Position
Trigger Mode	Free Run, Normal
Trigger Source	Internal
Trigger Slope	Positive / Negative
Trigger Sensitivity Equivalent Time:	3 divisions or more
Real Time:	2 divisions or more
HORIZONTAL
Samples per Division	25
Time / Division	50nS to 500nS / DIV (equivalent times) 1uS to 2S / DIV (real time)
Modes	Single, Normal, Auto
Accuracy Equivalent Time :	± (0.5 percent + 0.08 time/div)
Real Time:	± (0.1 percent + 0.04 time/div)
TREND MODE
Plot Time	30 sec/div to 1 hour/div
Plot Data Type	Max/Min Selectable
Memory	2 Screens
TRUE RMS DMM
DCV	(CH1, CH2) 400mV, 4, 40, 400, 600V
Basic DC Accuracy	± (0.5 percent + 5 digits)
ACV	(CH1, CH2) 400mV, 4, 40, 400, 600V
Basic ACV Accuracy	± 0.75 percent ± (1 percent + 10 digits)
Frequency	(CH1, CH2) 1 Hz to 20 MHz
Basic Frequency Accuracy	± (0.5 percent + 5 digits)
Ohm	(CH1 only) 400, 4k, 40k, 400k, 4M, 20M
Basic Ohm Accuracy	± (0.5 percent + 5 digits)
Continuity	(CH1 only) < 0.1k ohm, Â± (2 percent + 5 digits)
Diode Test	5mA maximum output
Continuous Autoset	Feature automatically determines the correct vertical and horizontal settings for optimum waveform viewing. Autoset provides hands free operation while moving between test points.

WARNING

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

(0)

Fluke 123/S Industrial ScopeMeter 20MHz Software Kit

$2,512.99

Available for Orders, Coming Soon Free Shipping.

Add To Cart

(0)

Fluke 124/S Industrial ScopeMeter 40MHz Software Kit

$3,255.99

Available for Orders, Coming Soon Free Shipping.

Add To Cart

(0)

AEMC OX7202 III Oscilloscope

$5,125.25

In Stock. Free Shipping.

Add To Cart

(0)

AEMC OX5022-CK Oscilloscope

~~$1,995.00~~ $1,895.25 Sale

In Stock. Free Shipping.

Add To Cart

(0)

AEMC OX5042-CK Oscilloscope

~~$2,500.00~~ $2,375.00 Sale

In Stock. Free Shipping.

Add To Cart

(0)

UniSource DS-1200 Digital Oscilloscope 200MHz

~~$799.00~~ $759.05 Sale

In Stock. Free Shipping.

Add To Cart

Applications:	TPI 460 Hand Held Oscilloscope
	Power Quality
	Variable Speed Drives
	Industrial Motor Controls
	Battery Testing
	Programmable Logic Controls
	NC/CNC Machines
	Uninterruptable Power Supplies
	Audio
	Video
	Industrial Lighting Controls
	Factory Automation
	Line Conditioners
	Voltage Regulators
	Inverters
	Gaming Industry

Characteristics:	TPI 460 Hand Held Oscilloscope
20 MHz Bandwidth	Capture signals from AC/DC drive motors, sensors, actuators, line and control voltages, UPS and industrial machines.
Cursor Readout	Measure the width and amplitude of the signal and display it on the screen instead of trying to figure it out manually.
Decibels	Accurately measure sound signals
	Pre and Post Triggering
	View the waveform before and after the point the scope triggers at to find glitches and other anomalies with the signal.
Trend Mode	Graph readings over a predetermined time period to check for surges or dropouts.
Dual Input	View two waveforms on the display for comparison and troubleshooting.
True RMS DMM	Measure AC/DC volts up to 600V, frequency to 20 MHz, and resistance to 20 Meg ohm. Obtain accurate measurements of non-sinusoidal AC voltage and current waveforms found in controls and circuits with True RMS.
Real Time Sample Rate	Capture spikes and dropouts of industrial signals with real time sampling of 25 megasamples per second.
Bright LCD Backlight	Adjust brightness levels for clarity in any light condition.
Optically Isolated RS232 Output	Transfer data safely without a direct connection to your computerâ€™s circuitry.
Charging Time	10 Hours

TPI 460 Hand Held Oscilloscope

Related Items

Mailing List