Fluke Fp FoodPro Thermometer for Food Safety

0 Review(s) Write a Review

DISCONTINUED

Fluke Fp FoodPro Thermometer for Food Safety is designed to notify the user of safe or unsafe food temperatures. The Fluke Fp FoodPro features an infrared measuring range from -35 to 275 degrees C, LED lights to indicate safe/unsafe food temperatures (Green/Red), and targeting LED lights to indicate exactly where you are aiming.

Availability: DISCONTINUED

Description
Features
Specifications
Applications
Resources

Specifications:	Fluke Fp FoodPro Food Safety Thermometer
	-30 degrees C to 200 degrees C
Accuracy	(Assumes ambient operating temperature of 23 degrees C ±2 degrees)
	Between 0 degrees C and 65 degrees C: ±1 degrees C
	Below 0 degrees C : ±1 degrees ±0.1 degree/degree
	Above 65 degrees C): ±1.5 percent of reading
Response time	<500 ms after initial reading
Spectral Response	8-14 microns
Emissivity	Pre-set for foodservice applications
Distance to spot size/Optical Resolution (D:S)	2.5:1 at 90 percent energy, typical
Typical working range (target illumination)	25 mm to 250 mm
Minimum target size	12 mm
Illumination to IR channel offset	13 mm
Operational Specifications	Repeatability Within accuracy specifications of the unit
Ambient operating range	0 degrees C to 50 degrees C
Relative Humidity	90 percent (+/- 5 percent) RH non condensing at 30 degrees C
Storage Temperature	-20 degrees C to 60 degrees C
Weight	100 g (with battery)
Dimensions	150 mm x 30 mm x50 mm
Power, battery life	1 AA alkaline
Battery Life alkaline	10 hours minimum at 23 degrees C
Target illumination	High Brightness LED
Display Resolution	4 digits, 0.2 degrees C
Displayhold (7seconds)	yes
LCD backlit display	no
Temperature display	4 digits, 0.2 degrees C resolution
Maximum temperature displayed	no
Timer	no
Environmental Data	IP54 sealing (hand-washable, non-submersible)
Other Specifications
Standards	Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)
Certifications	CE NSF
Warranty	2 years
	At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody
	Specifications subject to change without notice

Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

(0)

Fluke 700P04 Pressure Module

DISCONTINUED

DISCONTINUED

(0)

Fluke 700P06 Gage Pressure Module

DISCONTINUED

DISCONTINUED

(0)

Fluke 190-102 Color ScopeMeter 100 MHz 2 Channels

DISCONTINUED

DISCONTINUED

(0)

Fluke TiR3/FT-10/20 Thermal Imager with Fusion

DISCONTINUED

DISCONTINUED

(0)

Fluke CLKTO IR Window for Indoor Medium Voltage Applications

DISCONTINUED

DISCONTINUED

(0)

Fluke Ti400 Thermal Imager with 60Hz Advanced Performance

DISCONTINUED

DISCONTINUED

Characteristics:	Fluke Fp FoodPro Thermometer for Food Safety
	Infrared measuring range: -35 to 275 degrees C
	LED lights indicate safe/unsafe food temperatures (Green/Red)
	Target you are measuring is highlighted via LED illumination
	Unit can be washed (IP54 rated)

Applications:	Fluke Fp FoodPro Thermometer for Food Safety
Receiving:	Use FoodPro Series thermometers to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program
Food holding:	Easily monitor hot and cold food holding
Inspection:	Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements
Equipment Calibration:	Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs
Dining room:	Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste

Fluke Fp FoodPro Thermometer for Food Safety

Related Items

Mailing List